Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler!! Enter daily!

Bushwacker Flat Style Flare Kit, 4 Pieces (07-18 Jeep Wrangler JK 2 Door)

ExtremeTerrain no longer carries the Bushwacker Flat Style Flare Kit, 4 Pieces (07-18 Jeep Wrangler JK 2 Door). Please check out 2007-2018 JK Jeep Wrangler Fender Flares for an updated selection.

Features, Video & Details

  • Flat Style Fender Flare Set
  • Provides 9.50 Inches of Coverage
  • Installs with Minimal Drilling and Trimming
  • OEM Textured Black Finish
  • Dura-Flex 2000 TPO Construction
  • Includes DOT-Compliant LED Marker Light
  • 100% UV Stable
  • Made in the USA
  • Limited Lifetime Warranty
  • For 2007-2018 Jeep Wrangler 2 Door Models

Review & Installation Video

Review & Install Video

I'm Ryan from ExtremeTerrain.com, and this is my review of the Bushwacker Flat Style Fender Flare Kit, fitting all 2007 to 2016 JKs. There's a version of this kit available for both the two-door and the four-door Wrangler. Depending on your suspension setup and the size of the tires you're running, your uptravel may be limited by your fender flares. If your tires hit your fender flares when you're in an off-road situation, it can pop the flares right off the Jeep and you'll be picking them up off the side of the trail. Adding a set of flat fenders like this will provide additional clearance, so that you can have more uptravel without having any interference issues. Now there are a couple of thoughts when it comes to metal flares versus plastic flares like that you see here. Some people will say that a metal flare holds up better than a plastic flare when you rub it against a tree or another off-road obstacle, while others say that the metal flare not bending or breaking will actually transfer that impact into the body of the Jeep, causing a much more expensive repair. So if you're looking for a flat fender flare, you have the decision between metal and plastic flares, and if you decide to go with this set of plastic flares, this is a really nice option. These are going to be one of the highest-quality fender flares out there on the market, and they are a little bit more expensive because of it. Bushwacker likes to make their fender flares in a two-piece design. Well, in this case, there's actually more than two pieces. But the idea is that you have an inner fender that bolts directly onto the Jeep and then the fender flare itself that bolts to that inner fender. And there's some weather stripping that goes in-between. The flares themselves are made of a UV-resistant material, so they're not gonna fade over time, and this is a Duraflex plastic that is designed to bend if you rub it on an off-road obstacle, instead of breaking. Again, that's something that a metal flare is not going to do. These have a textured finish, which is really similar to that OE finish that you will have on your factory fender flares, so it'll look good with the other black plastic accents on your Jeep and a lot of textured, black powder coated aftermarket parts that you might bolt up to your Wrangler. The front flares provide a total of 9 1/2 inches of coverage, while the rears provide 4 3/4 inches, which will help keep the tires from throwing mud and other junk up on the side of the Jeep. These also include the lights that you need for your turn signals and side markers, even though you do have to do a little bit of wiring to get them set up. And these are designed to work with your factory inner fenders, even though you have to do some trimming to get them bolted up. All of the locations that need to be cut and the way that you can make those factory inners work with these is in the instructions so it makes the process pretty simple. I really like to run a set of inner fender liners because it keeps mud and junk out of the engine bay, which is especially important on the passenger side because you have a big bundle of wiring harnesses right there, which otherwise would be constantly barraged by things kicked up from that front passenger side tire. The process of installing a new set of fender flares is pretty simple, although it can take a little bit of time, especially when you consider the trimming that you need to do to get the inner fender liners working. The first step is to install those inner fenders with the weather stripping that's included and all of the hardware that's included in the kit. Once all of those pieces are bolted onto the Jeep, then you'll bolt the fender flare itself onto that inner fender. As I mentioned, the kit does include lights that will bolt right onto the front fenders, but you will have to do a little bit of wiring to get those working. The kit also includes alcohol rubs to help with the weather stripping adhesion and some reflectors to keep you completely DOT-approved. This is a really complete kit of a really high-quality fender flare, and you can see it when you look at all the components that are included. The whole installation of this kit should take about three hours or so, and you won't need any specialty tools. However, you will need a good socket set and something to trim the plastic inner fender liners. Now even though this is a really high-quality and very complete set of flat fenders, there are actually kits out there that are more expensive than this one, and some of them don't even include the lights. So in my opinion, while this is a little bit pricey, you're getting a lot of value for what you pay. If you're somebody who does a lot of hardcore off-roading and you plan to really beat up your fender flares and they're probably not gonna last that long, I would recommend going with one of the less expensive kits on the market. However, if you're somebody who plans on having these for a good, long time, it's my opinion that the investment upfront is worth it. So if you're looking to add a little bit of additional clearance for more uptravel on your two-door or four-door JK, I would definitely recommend taking a look at these Bushwacker Flat Fender Flares. So that's my review of the Bushwacker Flat Style Flare Kit, fitting all 2007 to 2016 JKs, that you can find right here at ExtremeTerrain.com.

Maximum Tire Coverage. The Bushwacker Flat Style Flare Kit is designed to fit your 2007-2016 two-door JK. There is a four-door option, so do be sure to pay attention to which one you choose for your Jeep. Up travel can be a serious issue when you do not have enough tire clearance and you may be tired of picking up your fender flares on the side of the trail due to them popping off. Flat fenders, such as the Bushwacker Flat Style Flare Kit, can help to add more clearance for your tires and prevent that interference that has you frustrated. These plastic flares are ideal for anyone who is looking for a flare that will be flexible and bend when impact occurs. The plastic is designed to absorb the impact as opposed to pushing it onto the body of your Jeep like metal flares do. You will find that this set is nice and priced affordable. It is one of the highest quality flare sets available on the market. The Bushwacker Flat Style Flare Kit comes in a two-piece design like all Bushwacker flares do. You will receive an inner fender, fender flares, and weather-stripping, which will protect the body of your Jeep. These fender flares provide you with 9.5 inches of coverage in the front and 4.75 inches of coverage in the back. Made from quality dura-flex plastic and UV treated, you can expect your flares to last for many years without the worry of chalking or fading. You will notice that this kit does come with lights and side markers, but you will need to pick up the wiring for it. Installation is simple, easy, and can be done the same day.

Built for Rugged Terrains. Each one of the flat fender flares is made from a dura-flex 2000 TPO for extreme durability. The material is coated in a UV protection to ensure that the OEM black color will not chalk or fade over time. All of the hardware in the Bushwacker Flat Style Flare Kit is made from stainless steel to ensure corrosion does not occur.

LED Side Marker Light. The Bushwacker Flat Style Flare Kit comes with a LED side marker light on each one of the fender flares. You can improve visibility of yourself and the area around you when you attempt to make turns. Each light will provide you with the same function as your factory setup.

Minor Drilling Required. Installation of the Bushwacker Flat Style Flare Kit is moderate in complexity and should take about three hours to perform. Minimal drilling is required, but no serious modifications are needed. All hardware is included in the kit for installation.

Warranty. This flare set is backed by Bushwacker's Lifetime Limited Warranty, ensuring your flares are free from defects for the life of your rig.

Application. The Bushwacker Flat Style Flare Kit is specifically designed for installation on 2007-2017 Jeep Wrangler JK 2 door models.

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

MPN# 10919-07

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • Fender Flare Set
  • (2) Side Reflectors
  • (2) LED Side Marker Lights
  • Edge Trim
  • Edge Trim Tool
  • Installation Hardware
Installation Info
Tech Specs
Will it fit my Wrangler?

You Might Also Like

Customer Photos (9) Submit Your Photo

View All 9 Photos

More Products You Might Like

Questions & Answers (9)

5 Top Rated Questions

With these fender, is there any way to paint them to match my cars color?

  • Yes, the Bushwacker Flat Style Flares, Fronts Only (07-17 Wrangler JK) can be painted. You can take these to your local body shop and have them paint matched.

Helpful (1)

Hi there! How much wider than factory fenders are these for the JK Wrangler? I have to have fenders that cover all the tire tread and I am running Mickey Thompson’s 35’s on a 2.5 Inch lift. With the factory flares my tires stick out about 2.5 inches in the front and 1.5 inches in the back beyond the factory fenders. Also, can these be painted? Thanks!

  • These would provide a bit less coverage than the factory flares as the factory fronts are 10" wide and the rears are 5" wide. This kit would be 9.50" in the front and 4.75" in the rear. 

Helpful (0)

The video says it comes w TS lights, but just looks like side marker right? If I’m correct, what do guys with 2015 2 doors do to run the TS. Thanks

  • There are able to be wired either directly into your turn signals or driving headlights to work as side markers, with the wiring kit included with these fender flares.

Helpful (0)

What is the length width of the front? I live in PA and inspection is rough if your tires stick out farther than your flares. I have 33×12.5

  • The Bushwacker Flat Style Flare Kit provides you with 9.5 inches of coverage in the front and 4.75 inches of coverage in the back.

Helpful (0)

Can I use (keep) the factory fender liners when I install these?

  • Yes, you can reuse the factory fender liners. You would just need to trim them as described in the install guide.

Helpful (0)
Post Your Question
4 More Questions
Hi Gang, I have a few questions... 1) Is there an installation manual? Neither of the links on the page seem to work for me. 2) Is it possible/easy to use the factory fender liners with this product? 3) How does the marker light connect? The connectors in the photo look like 1/4 speaker plugs to me. :) 1 answer
After removal of stock, what is the tire size I can go to? Looking at 35X12.5X17 is this possible? Running aftermarket rims w/ a 1/2 in over stock offset. 1 answer
Does the trimming required to install these prevent the re-use of the stock flares in the event I wanted to return the vehicle back to stock? I realized some metal would be missing but are the mount points for the stock flares entirely cut-off during the install process? 1 answer
Does the indicator come in smoke? or Clear lens? 1 answer

Recommended For You

Customer Reviews (28) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Afternoon

Installation Cost:$100-$250

  • Fit 4.528572 4.5
  • Appearance 4.880952 4.9
  • Bang For Your Buck 4.17381 4.2



  • 5/5

    Installation Time: Less than 1 Hour

    January 22, 2019

    Review from Bushwacker Textured Flat Style Fender Flares - Rear Pair (07-17 Wrangler JK 2 Door)

    Very easy install

    These fenders are great quality. They give alot more clearance for my 37's for sure.

    StaciH

    Year: 2007Submodel: Wrangler

    Helpful (4)

  • 5/5

    Installation Time: Full Day

    October 02, 2018

    Best plastic fender flairs.

    These things are not an easy install if you want it done right. There's nothing complicated about it, but it takes an attention to detail. Spent an entire day installing them, but it was worth it! They look awesome and are strong yet flexible when they need to be. No flapping or movement at highway speeds. Create all the tire clearance you need to run 35's. and no lift as long as you have the right back spacing on your wheels.

    Dweezer2013

    Year: 2015Submodel: Wrangler

    Helpful (5)

  • 1/5

    Installation Time: Full Day

    August 15, 2018

    dont get bushwacked

    looks good but parts missing in box hade two p2s and no d2 hard to installwith out it called bushwacker two tims no call back email them no responce hade to use p2 turned over redrill holes fore metal clips and a few other holes i thinkif i hade it to do over no more bushwacker if you need warranty they will not anser pohne ore call you back

    LarryS

    Year: 2013Submodel: Rubicon

    Helpful (6)

  • 4/5

    Installation Time: Afternoon

    August 12, 2018

    Review from Bushwacker Textured Flat Style Fender Flares - Rear Pair (07-17 Wrangler JK 2 Door)

    Good product

    They are a very good product. I did have an issue with them sending the wrong fender flares the first time but calling and letting them know they took care of the problem promptly and i was very stisfied with the results.

    AndrewS

    Year: 2013Submodel: Wrangler

    Helpful (5)

  • 5/5

    Installation Time: Afternoon

    June 18, 2018

    Review from Bushwacker Flat Style Flares, Fronts Only (07-17 Wrangler JK)

    nice product

    awesome and ease to install. love the quality. the right fitment and you could easily do it your self in less than two hrs.

    PauloS

    Year: 2012Submodel: Wrangler

    Helpful (7)

  • 5/5

    Installation Time: Full Day

    May 31, 2018

    Great 4 piece flare kit

    Ordered these in order to increase wheel room as I transition from 35's to 37's. Liked the ability to utilize the existing OEM inner flares. After watching a few videos I proceeded to tackle the installation. Not quite as easy as You Tube videos would lead you to believe. I am reasonably good with tools and installs but these did tax your patience. Most of the installation was a piece of cake. The hard part was getting the screws that go through the flares to the supports to line up correctly. None of them were exactly right - always had to search for the u clip hole. Once finished the flares look great and are a big step up from OEM. Be patient in the install. Frustrating at times but they do eventually get installed. Would recommend them.

    FrankS

    Year: 2014Submodel: Rubicon

    Helpful (7)

  • 4/5

    Installation Time: Full Day

    January 01, 2018

    Look Great!

    I really like the look of these fenders. They didn’t fit well on my ‘07 2 door Wrangler, but eventually we were able to make it work. Still great overall.

    JakobH

    Year: 2007Submodel: Wrangler

    Helpful (7)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    December 25, 2017

    Head Turner

    These fenders are the bomb. They look great, fit great and and a lot of character to the stance of my jeep. Mainline Auto Body in Santa Maria installed them and Bernie Flamm made sure the work was done to my satisfaction.

    JohnH

    Year: 2007Submodel: Wrangler

    Helpful (6)

  • 4/5

    Installation Time: Weekend

    November 21, 2017

    Look great

    First thing is they are not a just bolt em on item. The inner fenders are dificult to find a cut line. They have a lot of movement when released from the fenders. The bolts started siezing on second fitting. Not enough plastic push retainers for 2017 2 dr. Install had to use a few old ones. Top of fender is held with double sided rubber seal. Cant install if colder than 60 deg. lots of grinding for good fit. Drilled holes are terrible not really drilled just melted through from going to fast. Quanity not quality. I expected lots more for the high price that was paid. Got em on though and look good. Had to use some creative clamping for inner fenders they will flop after trimming to fit even captured in new fenders.

    AlbertS

    Year: 2017Submodel: Wrangler

    Helpful (8)

  • 5/5

    Installation Time: Afternoon

    October 06, 2017

    Great looks

    Take your time ! When cutting inner factory fenders leave them at least an extra 1 inch long and retrim as needed

    MichaelE

    Year: 2017Submodel: Wrangler

    Helpful (10)

  • 1/5

    September 12, 2017

    Never again!!!

    I bought these because I think they look amazing once installed. The key is installed. I took all four stock flares off and cut the inner liners to fit the new flares. The front driver side went on without much issue, but that was it. The front passenger side flare wouldn't fit over the brackets because the brackets were severely deformed. On the rear flares, the holes on the brackets and the holes on the flares didn't line up (off by over an inch). So here I am with flares that won't fit, inner fenders that are all shopped up to fit the junk Bushwackers, and stock flares that won't go back on because most the clips broke when they were removed. I returned them and order the Snyper flares.

    MaicalP

    Year: 2016Submodel: Wrangler

    Helpful (7)

  • 4/5

    Installation Time: Full Day

    August 25, 2017

    Review from Bushwacker Flat Style Flares, Fronts Only (07-17 Wrangler JK)

    Love The New Look

    I am still relatively new to Jeeping. I've had a Jeep for a few years but have just recently started going off-road. While attending a Jeep Jamboree, I noticed several Jeeps had the Bushwacker Flat Flares which allows room for your front end to articulate. That is why I chose these. The installation instruction pictures we're OK but I found a much better installation video online. Watch the entire video before installation. The installation was a bit challenging. The holes for the bolts that attach the fender flare supports to the fender where smaller than the bolts. I had to use my drill to make them a bit bigger so I could get the bolt to pass through. If you want to use the factory liners, you will have to trim them to fit the new fender. In the video, the installer used a pneumatic saw. I used a cutting wheel on my Dremel. It cut through the plastic like a hot knife through butter. I also had to drill the holes bigger in order to insert push retainers into the fender flare supports. Other than that, it was pretty straight forward.

    FrontBumper

    Year: 2016Submodel: Wrangler

    Helpful (11)

  • 4/5

    Installation Time: Full Day

    August 19, 2017

    Love them too freaking expensive

    Love them they look great where very well high-quality the really expensive though

    Tomboy

    Year: 2016Submodel: Wrangler

    Helpful (8)

  • 5/5

    Installation Time: Afternoon

    July 21, 2017

    Best Fenders

    I totally recommend this fenders. They look pretty amazing and also give a rude look to my JK :D

    JoeZackary

    Year: 2015Submodel: Wrangler

    Helpful (6)

  • 5/5

    Installation Time: Afternoon

    June 30, 2017

    Review from Bushwacker Flat Style Flares, Fronts Only (07-17 Wrangler JK)

    Front fenders

    These were pretty easy to install. After a few beers and friends for the install party jeep looks more aggressive with these fenders.

    BrianR

    Year: 2014Submodel: Wrangler

    Helpful (7)

  • 4/5

    Installation Time: Afternoon

    June 02, 2017

    Not to bad

    Plastic fender. Looks good though. I would recommend getting them painted

    KenW

    Year: 2014Submodel: Wrangler

    Helpful (8)

  • 5/5

    Installation Time: Afternoon

    May 22, 2017

    Bill of materials

    The parts list on the installation instructions is wrong.

    DavidC

    Year: 2008Submodel: Rubicon

    Helpful (8)

  • 3/5

    Installation Time: Afternoon

    April 24, 2017

    Love the look

    Love the look of these fenders, and the functionality, not too difficult to Install. Easier with an extra set of hands. I also recommend watching the installation video on youtube, it was an unbelievable amount of help. After having to run around and buy hardware that they failed to send with everything, it was overall an easy install.

    MichaelA

    Year: 2011Submodel: Wrangler

    Helpful (8)

  • 5/5

    Installation Time: Afternoon

    April 10, 2017

    Colorado H.A. Hunter

    I recommend bushwhacker flares to any body with a little savey,no problem. The purpose is for clearance as not to hit trees from the side,tire clearance ,and looks are great. Tyler C.

    TylerChacon

    Year: 2013Submodel: Rubicon

    Helpful (11)

  • 4/5

    Installation Time: Afternoon

    March 30, 2017

    Love the clearance!

    I bought these flares because I wanted to run 35's on my 2013 Rubicon without doing an additional lift. Absolutely provides the clearance needed (which surprised the guys at Firestone) and look great. The installation instructions were good, but the pictures weren't as clear as they could have been in some cases. Made some guesses (on the conservative side) when cutting the splash guards, and then trimmed more if the flares didn't fit perfectly. Even with that, installation was only about 5 hours, by myself.

    RogerT

    Year: 2013Submodel: Rubicon

    Helpful (8)

Related Wrangler Categories