How to install Barricade Extreme HD Rear Bumper on your Wrangler

Contents

(1) - Bumper
(2) - Bumper Plates
(1) - Bolt Kit

STEP 1 // Remove the (4) 15mm bolts securing the rear bumper.

STEP 2 // Next, slide the L-Shaped mounting brackets into the frame rails with the nut backing up to the predrilled hole in the frame.

STEP 3 // Slide new rear bumper into place, securing the bump but leaving the bolts loose.

STEP 4 // Secure the backing plate, then tighten all bumper bolts that hold the bumper to the frame.

STEP 5 // Attach the supplied driver side bumper plate using the supplied allen bolts.

STEP 6 // Attach the supplied passenger side bumper plate using the supplied allen bolts.