FREE 1 to 3-Day Delivery on Orders $119+ Details
How To Install a Barricade Extreme HD Rear Bumper on your 2007-2016 Jeep Wrangler JK
Installation Time
2 hours
Tools Required
- Ratchet
- 3⁄4 Socket
- Allen Key Set
- Safety Goggle
Shop Parts in this Guide
Tools Required:
Inside the Box:
Installation Instructions:
1. Remove the 6 bolts that connect the factory bumper to the chassis, and then remove the factory bumper.
2. Remove 3 bolts that connect the OE tow hook, and then remove the OE tow hook.
3. Place the L-Bracket into the end of the vehicle frame, with the threaded holes pointing away from the jeep so that the bumper will be held in place.
4. Place the new bumper on the vehicle, securing it but leaving the bolts loose.
5. From behind the OE bumper frame, place the backing plate above the bumper and secure it.
6. Tighten all bolts that secure the bumper to the frame.
7. Attach the bumper plates using the supplied Allen bolts.
8. Installation Complete!
Installation Instructions Written by ExtremeTerrain Customer Lazaro Gomez 04/11/2016
