Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P

How to Install Barricade Alloy Series Aluminum Front Bumper on your 07-18 Jeep Wrangler JK; 2018 Jeep Wrangler JL

Tools Required
  • Flathead Screwdriver
  • Phillips Screwdriver
  • 13,15,17,18,19mm Sockets
  • 13, 15, 17, 18 19mm Wrench
Extreme Terrain
Shop Parts in this Guide

(1) - Aluminum Bumper
(1) - Steel Winch Plate
(2) - D-Ring Mounting Plates
(2) - 3/4” D-Rings
(8) - Nuts and Bolts
(16)- Washers
(8) - Plastic Screw Inserts
(8) - Phillips Screws

STEP 1 // Remove the 6 pins holding the splash guard onto the vehicle

STEP 2 // Next, unplug the factory fog lights and loosen the (8) 19mm nuts holding the front bumper to the support beam of the vehicle.

STEP 3 // Remove the 2 push pins holding the top cover onto the vehicle

STEP 4 // To remove the fog lights, loosen the 4 phillips screws on each light.

STEP 5 // Insert the supplied plastic screw retainers.

STEP 6 // Using the supplied screws, secure the fog light housing to the bumper.

STEP 7 // With a helper, place the winch mount behind the bumper. Insert (8) bolts and flat washers through the D-ring mounting plate, through the bumper and then through the winch plate. Installing the lock washer and nut on the back side of the frame mounting pad. Ensure all bolts are tight.

STEP 8 // In most cases, the fog light harness will need to be extended. Cut and splice the wires to the appropriate length.

STEP 9 // Install supplied D-rings.