Talk to Wrangler Enthusiasts
1-844-887-6502
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping on Orders Over $75. Details

How to Install a Barricade Trail Force HD Front Bumper on your 2007-2017 Jeep Wrangler JK

Installation Time

2 hours

Tools Required
  • Flathead Screwdriver
  • Phillips Screwdriver
  • 15mm-19mm Wrench
  • 15mm-19mm Sockets
Extreme Terrain
Shop Parts in this Guide


STEP 1

Remove the 6 pins holding the splash guard onto the vehicle.


STEP 2

Next, unplug the factory fog lights and loosen the (8) 19mm nuts holding the front bumper to the support beam of the vehicle. 


STEP 3

Remove the 2 push pins holding the top cover onto the vehicle 


STEP 4

To remove the fog lights, loosen the 4 phillips screws on each light. 


STEP 5

Reinstall the fog lights onto the new bumper by using the supplied bolt and screws to secure it into the housings.


STEP 6

Slide the bumper in place. Using the supplied washers and nuts, secure the bumper to the frame. 


STEP 7

Route the fog light wiring above the frame rail and plug it back into the fog light housing.

This guide applies to Vehicle years: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and Submodels: JK, JK Unlimited, JK Rubicon, YJ, TJ, TJ Rubicon, TJ Unlimited