How to install Barricade Extreme HD Stubby Front Bumper on your 07-18 Jeep Wrangler JK; 2018 Jeep Wrangler JL

Contents

(1) - Bumper
(8) - Large Washers
(6) - Lock Nuts
(2) - Lock washers
(2) - Bolts

STEP 1 // Remove the 6 pins holding the splash guard onto the vehicle

STEP 2 // Next, unplug the factory fog lights and loosen the (8) 19mm nuts holding the front bumper to the support beam of the vehicle.

STEP 3 // Remove the 2 push pins holding the top cover onto the vehicle.

STEP 4 // Install new bumper using the supplied hardware.

STEP 5 // Insert the winch nuts into the winch housing.

STEP 6 // Line up the bolt holes with the rear most holes on the bumper. Using the bolts supplied with the winch, secure to winch to the bumper.

STEP 7 // Install the roller fairlead using the bolts supplied with the winch.

STEP 8 // Install the LED Light bar using the brackets and hardware supplied with the 21” LED Light.