(approx) 1 Hour
Simple installation for anyone.
FREE 2 or 3-Day Delivery on 10,000+ Items. Details
$244.99 (pair)FREE Shipping Market Price $280.99 You Save 13% ($36.00)
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Hey, guys. Joe from ExtremeTerrain. And today we're gonna be working with the 5-Inch iStep Running Boards in Hairline Silver, fitting all '05 and newer Tacoma double cabs. Now this set is gonna be perfect for the Tacoma owner out there that's looking for a cost-effective yet stylish way to make getting in and out of their truck just a little bit easier. These steps are made out of aircraft grade 6061 aluminum which simply put is one of the best materials out there, it's durable yet lightweight. The majority of this is finished in that hairline silver which is going to give it that nice flat silver look. On top, we have a 5-inch wide black treaded step that runs the entire length of the board perfect to get a grip in any wet or muddy conditions. I really like the way that black tread and the hairline silver compliment each other, I think it plays off the wheels on our '16 Tacoma here really nicely. Now if the silver here is not your thing, I definitely get it, not only does iStep offer this in black as well, they also offer a 4, 5 and 6-inch variant for both the double cab like we have here and the access cab as well.Pricing for the pair is going to come in right around that $200 mark which makes it one of the most budget-friendly on the site, 6061 aluminum, you can't go wrong. This is really a no-frills option, you get that tread all the way down the length of the running board, I really like that. This has a lot going for it personally, one of my favorites. Now if you're still not sold, also included in that price is going to be a one-year limited manufacturer's warranty.Install here is going to be extremely easy. There's threaded holes underneath all '05 and newer Tacomas which are perfect for our mounting brackets here. I'm gonna give it an easy one out of three wrenches on our difficulty meter, there's no modification required, should take you at most an hour to get these hooked up to your truck. So without any further ado, let me show you what you'll need to do this and how it's done.Tools you'll need to get these on your truck are going to include an impact or ratchet, small extension, 13 and 10-millimeter sockets. So like I said earlier, this install is going to be extremely easy. We're just gonna hold our bracket up to the threaded holes on the bottom and tighten it down with the 13-millimeter hardware included in the kit. We're gonna start at the passenger side rear but the install is gonna be the same exact thing for the driver side. Now as you can see, this bracket here does have a sticker on it marked with DC and PR so this could double as either the driver side center bracket or the passenger side rear.Now moving underneath of our Tacoma here you can better see the pre-threaded holes that come on the bottom, they're perfect for mounting brackets like I said earlier. Now from the factory, these do have plastic caps on them. If yours does, which it probably does all you need to remove those is either a trim panel tool or a pair of pliers. We're gonna do the same exact thing for the side middle. And if you take a close look at that sticker, you'll see this will also work for the driver side rear. The front is actually going to be a little bit different here, as you can see the spacing on these two bolts is a little bit further apart.Next, we're gonna grab a board, doesn't matter which one, they're not driver or passenger-specific, we're gonna flip it over here and that's gonna reveal these two channels. We're gonna insert these square head bolts into each of those channels. We're going to put three of these in each channel and I'm just gonna bring these to the middle for now and sort them out once we drop the board onto the brackets. Next, we are gonna drop the board on the brackets, spread those bolts out make sure they're nice and seated in the brackets and secure this board with the 10-millimeter nyloc nuts in the kit. Install is going to be the same thing except mirrored for the driver side.But that's gonna do it for my review and install of the 5-Inch iStep Running Boards in Hairline Silver, fitting all '05 and newer Tacoma double cabs. Thank you for watching. Make sure you subscribe to ExtremeTerrain for more videos like this and all things Tacoma.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Sophisticated Finish Touch. You don’t have to endure the plain and flimsy factory side steps that come with your Tacoma. Replace them with a stylish pair of 5-Inch iStep Running Boards in Hairline Silver. These aluminum running boards feature a low profile design that looks great with any truck. They provide a comfortable foothold for easier entry and exit, as well as some shielding from flying rocks and roadside debris.
Premium Aluminum Running Boards. The 5-inch iStep Running Boards in Hairline Silver are made from tough 6061-grade aluminum. This aluminum alloy is the same material used in the aeronautics industry, so you should be confident about the quality and durability of these running boards. Additionally, the surfaces are protected from rust and corrosion with the brushed hairline silver finish of each board.
Bolt-On Installation. You won’t need to do any alterations or modifications to your Tacoma or the products for installation. These running boards are designed to mount using existing factory mounting points for a true bolt-in install.
Application. These 5-inch iStep Running Boards in Hairline Silver will fit all 2005-2023 Toyota Tacoma Double Cab models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
10 More Questions