Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Increase Your Power. Do you want to improve your low to mid-range power? Would you like to see an increase in both torque and fuel economy? Then you want the Airaid PowerAid Throttle Body Spacer. Manufactured from aircraft quality billet aluminum, and complete with a kit that includes everything you need for installation, this is an affordable, easy to use option for the Jeep owner who insists on more power but doesn't want to give up on fuel economy.
Improve Fuel Economy. The Airaid Poweraid Throttle Body Spacer not only improves the power and performance of your Jeep, but with its unique "Helix Bore" design, it also maximizes fuel efficiency saving you money at the gas pump. The Helix Bore creates a spinning action to the incoming air to provide superior atomization of the air fuel mixture for better combustion.
Billet Aluminum Construction. CNC machined from the highest quality aircraft grade 6061-T6 billet aluminum the Airaid Poweraid Throttle Body Spacer is anodized in a red finish for great under styling and includes all the necessary hardware and instructions for a simple straightforward installation.
CARB Certified. The Airaid PowerAid Throttle Body Spacer is 50-state smog legal under Carb EO # D-609.
Application. The Airaid PowerAid Throttle Body Spacer is designed to fit on the 1991 - 2002 Wrangler YJs and TJs with 2.5-liter engines and the factory throttle body spacer installed.
Note: Coupon codes cannot be applied to this product.
Fitment: 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 01, 2020
Total let down
Installed in minutes, thank goodness because it didn't take long to remove it. Slowed my jeep down!Helpful (0)
November 03, 2019
Throttle body spacer
Fit perfectly on my 92 Jeep Wrangler 4 cylinder engine, it was easy to install. It definitely gave me a little more power which is what I was looking for,didn’t really notice better gas mileage. Very satisfied with this product.Helpful (2)
May 01, 2019
well worth the money, it was an easy install, perfect fit and a small performance gain in the top end.Helpful (4)
April 24, 2019
Made the hood look great and added plenty of ventilation. Loved the metal template. Made cutting a breeze and took away the worries of it sliding and messing up the cuts. The only thing is to be careful if a nut is tight it will make the affixed studs spin. Overall it is a great product.Helpful (3)
March 22, 2019
Very good for the price.
This piece was super easy to install and a direct fit, haven't noticed any difference in horsepower, but I didn't expect to. Just a great peace of mind knowing my engine is getting optimal air intakeHelpful (3)
March 12, 2019
Great add on
This is a great and on peace that any backyard mechanic can do with his or hers toolsHelpful (4)
December 23, 2018
Easy installation works great looks great, added power.Helpful (8)
November 19, 2018
Doesn't fit with certain aftermarket intakes.
It's possible the part won't fit if you're running an aftermarket intake, When I went to install mine it caused my intake pipe to collide with the brake booster, and not fit. :/Helpful (10)
November 14, 2018
Throttle body spacer
This is great product to go along with a intake system and exhaust.Helpful (10)
September 09, 2018
I added the airaid spacer with the BBK 62 throttle body. I had already put on a KandN cold air intake. The combo is the best modification you can get legally in California. I can feel and hear the power and smoothness. Very happy.Helpful (12)
Please tell me exactly what this is designed to do and how it does it? Thanks
Hello, the Airaid PowerAid Throttle Body Spacer (91-06 Wrangler YJ & TJ w/ 4.0L) is a piece of metal used to change the airflow into the intake manifold. The spacer is bolted on the back of the throttle body, downstream of the main airflow. This is strictly an aftermarket enhancement used to increase the fuel economy, torque and horsepower. It basically directs the flow of air into the manifold to maximize the volume that goes into the intake.
Can this fit a 2.5 L
The Airaid PowerAid Throttle Body Spacer is designed specifically for the 4.0L, and would be incompatible with the 2.5L.
Does this throttle body spacer fit a 62MM throttle body?
No, the Airaid PowerAid Throttle Body Spacer is intended for the stock throttle body which is 55 mm.
What are the issues if you install this part in a CA vehicle (not pass smog, etc)? Customer Service named off a whole list of possible issues.
This item is CARB approved, meaning it is 100% legal to use in California and will not stop the vehicle from passing Smog/emissions testing.
This spacer said it is 50 states compliant. But the warning just before I was going to purchase this item, said not for California on hi-way. ??? Please let me know!
The Airaid PowerAid Throttle Body Spacer is CARB OE Certified meaning this is legal for use upon highway in the state of California and all other 49 States.
Hi,I'm sorry to hear you are having problems with your Throttle Body Spacer, please call or send us an email and we can help you out with your problem. http://www.extremeterrain.com/contact.html
Hello, the Airaid PowerAid Throttle Body Spacer (91-02 Wrangler YJ & TJ w/ 2.5L) is compatible with an Aftermarket Cold Air Intake.
Hello, the Airaid PowerAid Throttle Body Spacer (91-06 Wrangler YJ & TJ w/ 4.0L) is only meant to be used with the Factory throttle body.
Hello, yes, you will be able to use the Airaid PowerAid Throttle Body Spacer (91-06 Wrangler YJ & TJ w/ 4.0L) together with a Snorkel.
Simple installation for anyone.
What's in the Box