Installation Time
(approx) 2 Hours
Difficulty Level:
Light to Moderate mechanical skill required.
Installation Guides
No guide available for this part yet.
FREE 1 to 3-Day Delivery on Orders $149+ Details
$71.95 each
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Features, Description, Reviews, Q&A, Specs & Installation
High-Quality Lift Solution. The Zone Offroad 2-Inch Single Leaf Spring; Front or Rear is designed to provide a 2-inch lift for the Jeep Wrangler YJ, enhancing ground clearance and off-road capability. This leaf spring allows you to upgrade your suspension setup for better handling and improved vehicle stance.
_x000D__x000D_Construction and Appearance. The spring features a 4-leaf pack construction with center leaf spacer plates between each leaf to reduce internal friction. It also includes anti-friction pads, which ensure smooth and quiet operation during suspension movement, contributing to a durable and reliable performance component.
_x000D__x000D_Installation. Installation requires moderate skill and is estimated to take approximately two hours. No drilling is typically necessary, but bushings and U-bolts are not included and must be obtained separately.
_x000D__x000D_Application. Specifically designed to fit the 1987-1995 Jeep Wrangler YJ models. Note that bushings are not included with this part, and when installing 2" rear springs without additional driveline modifications, 4-degree shims are recommended to correct driveline angle.
Zone Offroad ZONJ0200
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 2 Hours
Difficulty Level:
Light to Moderate mechanical skill required.
Installation Guides
No guide available for this part yet.
What's in the Box
Tech Guides:
If installing 2" rear springs without any additional driveline modifications (ex: transfer case drop, SYE/CV driveshaft, motor mount lift) it is necessary to install 4 degree shims on the rear leaf springs to correct the rear driveline angle. See optional accessory section to add 4 degree shims and new center pin kit. (Shim Kit # U3001 - Center Pin Kit # U3010)