Zombie Racks Wasteland Half Roof Rack with Hybrid Death Rails; Textured Black (18-25 Jeep Wrangler JL 4-Door)Find parts that fit my vehicle

This Is A Complete Half Rack Assembly With Hybrid Death Rails For The 2018+ 4 Door Jeep JL Wrangler Models With Factory Hardtops, Installed With Bolt On Drip Rail Mounts Which Require NO DRILLING. This Rack System Extends Half Roof Length With The Freedom Panel Area Unobscured For Easy Removal. With Eight Heavy Duty Drip Rail Mounts, This Rack Offers Superior Strength & Weight Carrying Capacity*. This System Is Configured As A Hybrid Death Rail System With Low Profile Rails. Double Tap Rails Can Be Added Or HDR Rails Can Be Removed At Any Time If You So Choose.
Each Full Rack Assembly Contains The Following:
(2) Flat Front Ends (Driver & Passenger Sides)
(4) Intermediate Assemblies
(2) Short Ends (Driver & Passenger Sides)
(10) 54" Crossbars
(8) Heavy Duty Bolt On Drip Rail Mounts
(2) HDR Rail Assemblies (Rails, Rail Side Supports & Mounting Hardware)
Optional Selections

FINISH
TEXTURED BLACK - A Durable Fine Textured Black Powdercoat Finish
RAW - Raw Aluminum Finish With No Surface Prep*

SPECS
LENGTH - Overall 51" (4ft 3in Or 129.54cm)
WIDTH - 54" Overall, 53" Inside Rails
HEIGHT- (Height Increase Over Hardtop Humps) +3.8"
CARGO AREA - 19.13 sq. ft. Cargo Area
WEIGHT - HDR 39lbs
CAPACITY* - Factory HardTop Rated Capacity Of 250lbs Static, 120lbs Dynamic - Overload At Your Own Risk. ALWAYS Distribute Loads As Evenly As Possible, Secure With Correct Equipment And Check Load Periodically During Travels.

*Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov