How to Install Teraflex Extreme Heavy Duty Flipped Drag Link Kit on your Wrangler

Prior to beginning this or any installation read these instructions to familiarize yourself with the required steps and evaluate if you are experienced and capable to personally perform these modifications. A factory service manual should be used in conjunction with these installation in-structions.

Refer to the parts list to ensure that all necessary components and hardware has been included. If any parts are missing please contact your local TeraFlex dealer for assistance.

Reinstall your tire and wheel assembly. With your tires pointed straight, adjust your steering wheel by simply rotating the adjusting collar on your new drag link until the wheel is centered. It is important to make sure that while tightening the pinch bolts, after you have your  steering wheel centered, the drag link ends on both sides are in a neutral position and are not bound up  (rotated opposite directions). 

(NOTE: The drag link assembly should be able to ro- tate up and down a few degrees. This is normal and allows for a degree change in the knuckles when turn- ing, without steering binding.) 

Finish your installation by greasing the premium joints of your new TeraFlex Drag Link with a quality grease and install #344408 Grease Zerk Dust Cover. 

Enjoy your new TeraFlex HD Drag Link!