Improved Vehicle Handling.
When doing an upgrade of your suspension components, do not forget the sway bar link. This small part plays the vital role of attaching the sway bar to the suspension, without which your truck would lose balance and lean so much on one side when driving around corners. The Teraflex front adjustable S/T sway bar link comes in handy to replace your broken or worn out sway bar link. To fine tune for each application, the center link is threaded on both ends.
This Teraflex 4 inch front sway bar link is adjustable allowing for easy correction of the sway bar configuration on your lifted truck. It is designed to be used on Jeeps with a 0 to 3 inch suspension lift and is ideal for both the streets and the trails.
Teraflex guarantees you high quality for this sway bar end link. It is solidly constructed for unmatched strength and durability and is also zinc planted for maximum resistance to rusting and corrosion.
Installing the sway bar link is quite an easy task. After raising the truck with a floor jack and locating the old sway bar link, unbolt both ends by removing the nuts. Replace it with the new sway bar link then secure using the provided hardware.
TeraFlex grants a lifetime limited warranty for this 4in. Front Adjustable S/T Sway Bar Link against manufacturer’s defects in material and workmanship. This applies as long as the original purchaser owns the vehicle on which the sway bar link was originally installed. This doesn’t cover for damages due to improper installation, abuse or negligence.
. Teraflex 4in. Front Adjustable S/T Sway Bar Link for 0-3 in. is ideal for all 1997 to 2018 Jeep Wrangler TJ, amp and JK models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov