Ultra Frame Service Body Receiver Class V Trailer Hitch; 44-Inch Crosstube; Short 7-Inch Side Brackets (Universal; Some Adaptation May Be Required)

High-Quality Trailer Hitch. With Draw-Tite’s Tacoma Ultra Frame Service Body Receiver Class V Trailer Hitch, you get a trailer hitch designed for heavy and full-frame suspensions. Ideal for larger vehicles, such as trucks and vans, this hitch has a gross trailer weight of 16,000 Pounds. It’s also designed for stability at every turn, with larger chain loops, a tight ball mount, and reinforced pinholes, ensuring your trailer stays stable for your entire journey.

Coated and Protected. Rough and rugged, this trailer hitch is made using tough metal that is impact-resistant and capable of supporting heavy loads. Draw-Tite has also double-coated the part, using an E-coat for the undercoat and a black powder-coated finish. Both coats combine to provide tons of protection against environmental toxins and the rusting effects of rain and snow.

Straightforward Installation. The Tacoma Ultra Frame Service Body Receiver Class V Trailer Hitch fits directly into 2-Inch hitch receivers with no need for drilling or cutting. The 44-Inch crosstube and 7-Inch side brackets provide the flexibility needed to fit multiple types of Class V trailers.

Protected for Life. For as long as you own this trailer hitch, you benefit from Draw-Tites’ limited lifetime warranty. This entitles you to a replacement or repair if you discover manufacturing or material faults.

Application. The Tacoma Ultra Frame Service Body Receiver Class V Trailer Hitch is designed for Class V trailers and will fit your vehicle’s 2-Inch receiver hitch.

Installation Difficulty. Fitting this part to your trailer hitch is simple and only takes a couple of minutes. However, you may find that attaching your trailer to the hitch is more challenging.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov