FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install T-REX T1 Series Fog Light Rings on your Wrangler
Installation Time
10 minutes
Tools Required
- Screwdriver Set
- Marker
- Drill Bit Set/Dril
Hardware / Parts List:
2 Fog Light Accents
8 6/32 x ½” Polished Screws
Step 1
Read and understand all instructions before attempting the install of this grille. Be sure that the package of hardware matches the hardware list as listed above. Next, test fit the T-REX accent to the vehicles factory openings. You are now ready for the install:
Step 2
Making sure that the fog light accent is centered, mark each hole using a bright colored marker. After the holes are marked, drill pilot holes where you have previously marked (1). DO NOT DRILL THE HOLES BIGGER THAN THE SCREWS! Place the screws into the holes. Tighten each screw snug so not to strip out the plastic. Repeat this process on the opposite of the bumper.
