How to Install T-REX T1 Series Billet Exterior - Front Bumper Guards Plate on your 07-13 Wrangler

Hardware / Parts List:

2 Bumper Guard Plate Accents

8 #10X3/4” Polished Hex Head Screws

8 10/32” Nylon Lock Nuts

8 1” Fender Washers

Step 1
Read and understand all instructions before attempting the install of this grille. Be sure that the package of hardware matches the hardware list as listed above. Next, test fit the T-REX accent to the vehicles factory openings. You are now ready for the install:

Step 2
Place the new plate on the bumper guard. Making sure that the plate is
straight, Mark each hole using a bright colored marker. After the holes are
marked, drill small pilot holes where you have previously marked (1). Place the
bumper plate to the vehicle. Using the hardware; secure the plate to the
bumper. Repeat this on the second plate.