Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P

How to Install Suntop Tailmesa Tailgate Table (07-18 Jeep Wrangler JK) on your Jeep Wrangler

Installation Time

60 minutes

Tools Required
  • Philips Head Screwdriver
Extreme Terrain
Shop Parts in this Guide

1. Pop the wire cover off corner of the inside tailgate (Figure A).

Figure A

2. Remove the entire cover (Figure B).

Figure B

3. Press each of the white screw inserts into the lined holes (Figure C).

Figure C

4. Press the tailgate table into place and slide a screw into each of the white screw inserts using a Philips head screwdriver (Figure D).

Figure D

5. Tighten each screw into place (Figure E).

Figure E

6. With all the screws tightened into place, pull out both sides and insert each side's notch into the top and bottom pull-out trays of the table (Figure F).

Figure F



Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/30/2018