Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Smittybilt Tubular Rear Bumper w/Hitch, Gloss Black on your 1987-2006 Wrangler

Tools Required
  • Basic Hand Tools Required
Extreme Terrain
Shop Parts in this Guide

Remove the factory bumper. Locate all the 7/16" hardware. Place the hitch bracket in the same location as the factory bumper. Line up the holes in the bracket with the holes in the back of the frame and secure with 7/16" hardware supplied. Position the bumper up to

Be sure to use all hardware supplied and tighten all bolts.

IMPORTANT: To protect your investment, wax this product after installing. Regular waxing is recommended.