Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler Enter Daily

Smittybilt 3 in. Sure Side Step Bars - Gloss Black (87-95 Jeep Wrangler YJ)

ExtremeTerrain no longer carries the Smittybilt 3 in. Sure Side Step Bars - Gloss Black (87-95 Jeep Wrangler YJ). Please check out 1987-1995 YJ Wrangler Armor & Protection for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Side Step Bars
  • 3 Inch Round Steel Tubing
  • Gloss Black Powder Coat Finish
  • 29.3 lbs
  • Step in and Out of Your Jeep Easier
  • Zinc Undercoating
  • Non-Slip Polyester Step Pad
  • Includes Installation Hardware
  • Bolt-On with Some Drilling
  • Fits 1987 - 1995 Wrangler YJs
Construction. Smittybilt's step bars are constructed out of 3 inch round steel tubing. Smittybilt focused on durability and lasting toughness with these bars. The bars are first e-coated in a zinc undercoating for rust prevention, and then the bars are finished with a gloss black powder coat. There isn't a single sliver of exposed metal on the whole bar to minimize the potential of rust.

Protection. Step bars are particularly useful for lifted rigs by making getting and out of your Jeep easier for all passengers. The non-slip polyester step pads are secured with five pins to provide a secure traction pad. The mounting brackets are 3/8 inches by 1/4 inches, and are designed to match your Jeep's frame perfectly.

Accessories. These bars come with self tapping bolts.

Application. These bars install onto 1987 - 1995 YJ Wranglers with some drilling required.

Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

MPN# JN44-S2B

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (2) Nerf Bars
  • Hardware
Installation Info
Tech Specs
Will it fit my Wrangler?

You Might Also Like

Customer Photos

More Products You Might Like

Q & A

No questions about this product yet.

Ask the First Question

Recommended For You

Customer Reviews (2) Write a Review

Overall Rating 3.5

out of 5 stars

Installation Time:Afternoon

  • Protection 5 5
  • Fit 4 4
  • Appearance 5 5
  • Bang For Your Buck 5 5



  • 4/5

    Installation Time: Afternoon

    September 19, 2017

    Step Side Bars

    The only issue with installing these Step Side Bars was the angle of the flat plate that bolts to the frame. Had to over tighten at first to get the plate to contour to the frame angle, then torque properly. Other than that they are a five star. Saved the body twice on our last Moab trip.

    Spence51

    Year: 1987Submodel: Wrangler

    Helpful (10)

  • 3/5

    Installation Time: Afternoon

    August 31, 2017

    Smittybilt Side Step Bars

    Bars are perfect length, good paint and finish. Flanges mount right to the frame. Installation instructions are a bit lacking and the self tapping bolts are extremely difficult to install. Calls for 5/16" bit for the 10mm bolt. Consulted machining handbook, and found it needed larger bit. Also would be good to develop a paper template to tape to frame for start punch and drilling holes.

    Mark

    Year: 1992Submodel: Wrangler

    Helpful (10)