Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Function. If your front bucket seat is starting to get old and worn out, replace it with Smittybilt's standard front bucket seat. Made of high quality charcoal gray denim, this front seat will have your Wrangler looking and feeling new with the added benefit of increasing comfort.
Properties. These front seats use tubular steel frames that are welded super strong and have a powder coated finish to prevent rust. Their super-thick foam sides and dense foam seats and backs provide you with extra ergonomic comfort, while their heavy-duty suspension springs provide a comfortable and smooth ride.
Application. Fits 1987-2006 Wrangler YJ and TJ models. All 1997-2006 models required a bracket adapter for installation, please see specs tab for detailed part numbers.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 01, 2019
Not worth the price even.
The seat form at front of seat sits 2 to 3 inches higher with a tilt upward, all where your knee leaves the seat. The entire seat is stationary and sits tilted up and back. Not at all comfortable to be in a driving position. If you are a shorter person you will not reach your foot pedals with these seats. They might serve better purpose as rear seats. Im ready to BURN my jeep down with the seats in it, just to burn the seats gone. Was a mistake tossing my original seats. Smitty should stop selling them, they suck.Helpful (0)
December 10, 2018
Not standard SIZE !!
The seat looks good for the price. I wish they would clearly explain to you its not as tall as original seat. Im 6 foot and the top of the seat reaches the lower part of my neck not good if your wheeling and bouncing around. Im disappointed with this purchase. I would not have bought this, but its advertised as standard front seat. No dimensions this sucks it would probably cost as much to ship back.Helpful (2)
November 30, 2018
These seats are a good replacement . I wish they would say they sit about an inch and a half higher than OEM seats. This is why only 3 stars on fitment.Helpful (2)
March 14, 2018
SUPER NICE, just one issue.
The seats fit perfect and look awesome, there was only one issue and that was one of the threaded holes nuts broke loose when we hand tighten the bolt, hince the 4 out of 5 rating. But got it tight by using a visegrip on the nut that broke loose. Other than this issue the seats are very nice!!Helpful (3)
November 28, 2017
Smitty Built Seats
The product is fantastic, fitment is perfect, support stands out most of all. Don't let the low price scare you these are great especially when you compare them to original.Helpful (4)
September 23, 2017
Very easy to install as it is a direct fit to original seat frame Very comfortable, not quite the heights of original seatHelpful (4)
September 22, 2017
no bumps about it
This seat is very comfortable for my jeep. Because of my large tires, it makes my ride a lot smoother.Helpful (5)
May 18, 2017
4 bolts quickly removes the old seat. I replaced both front seats. THEN, 4 more smaller bolts to remove the seat slide rack from each seat; then reinstall to the new sets. If you knew what was next, I'd say about 40 min total. I took about one hour for both seats, with some cleanup of the old sliders and seat bases.Helpful (4)
February 08, 2017
Seat was great. Easy to put in. Sits great. Very happy with both seats.Helpful (5)
August 20, 2016
Seats are good looking and soft. They do not have back adjustments! Great for economy seats.Helpful (4)
Is the material all vinyl or is the denim on the seat area and vinyl surrounding the seats. I want to replace both drivers and passenger seats, will buying this seat for both work ok and will the seat slide lever work the same and still be in the same position under the seat??
The Smittybilt Standard Front Bucket Seat will be a vinyl material in a Gray Denim color. Depending on the year and model of your Wrangler you may need a seat adapter. This seat can be used on the driver side and passenger side. The seat will have a fixed back so it will not fold forward for ease of getting in the back.
I'm confused after looking at the installation spec. Does a 1997 to 2002 need the 49900 Driver Side adapter part?
To install the Smittybilt Standard Front Bucket Seat on a 1997-2002 Wrangler, you need the Driver Side Adapter, part number J17526 MPN #49900, for the driver side and the Passenger Side Adapter, part number J17533 MPN #49901, for the passenger side. Smittybilt Front Seat Adapter Driver Side: https://www.extremeterrain.com/smittybilt-seat-adapters-all-tj-49900.html Smittybilt Front Seat Adapter Passenger Side: https://www.extremeterrain.com/smittybilt-seat-adapters-all-tj-49901.html
Hello, I am not familiar with this Denim Product . Is it a Vinyl product , or a cloth material ? Thank you Dean
Hello, this seat is more of a Vinyl product.
Simple installation for anyone.
What's in the Box