How to Install Smittybilt Frame Cover - Rear - Black Textured on your 2007-2013 Wrangler

1. REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.

2. Locate, remove and set aside the individual plates.

3. Remove the top bolt from each side of the bumper mount and set them aside.

4. Set one of the plates over its location (Fig 1)

5. Start the bolt in the removable bracket. The removable bracket can be loosened and moved over to align with the fill plate bracket. (Fig 2)

6. Start the bolt in the bumper mount (Fig 3)

7. Repeat the operations on the other side of the vehicle

8. Level and adjust the plates before tightening the fasteners. Leave a gap of about 1/8-inch around the plates. (Fig 1)