How to Install Smittybilt Billet Grille - Overlay (07-17 Wrangler JK) on your Jeep Wrangler

NOTE: Carefully read entire instructions thoroughly before attempting to install this part.

1. Inspect product and check components with items listed above.

2. Pop Hood, remove plastic shroud at the top and set fasteners aside.

3. Optional: Using factory instructions, remove the entire front grille shell (as pictured in all Figures).

4. Position the lower Billet Grille onto grille shell cavity (Figure 2).

5. Loosely attach the Billet Grille by holding the Metal Brackets behind factory grille shell and inserting the Phillips Screws (from the front) through the Billet Grille holes and Metal Brackets, secure them with Flange Nuts provided (Figure 3).

6. Repeat Steps 4 and 5 for top section of Billet Grille.

7. Once the Billet Grilles are loosely attached, center them and tighten all Phillips Screws at the same rate.

8. Reinstall the plastic shroud with the fasteners removed in Step 2.

We recommend normal cleaning by using mild soap and water also applying a non-abrasive aluminum polish on a regular schedule. (Taking into consideration your climate and driving time and conditions.)