FREE 1 to 3-Day Delivery on Orders $149+ Details

Talk to a Wrangler Sales Tech
1-610-990-4559
M-F 8:30A-11P ET, Sat-Sun 8:30A-9P ET
Logo Image
$6,000 Giveaway! Enter Daily >

How to Install Rugged Ridge Sunvisor Set - Agate (97-02 Wrangler TJ) on your Jeep Wrangler

Installation Time

30 minutes

Tools Required
  • T20 Torx Bit
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

Also shown is the Omix-ADA Transfer Case Sunvisor Decal (97-98 Wrangler TJ) Item J21494

Installation Instructions

1. Before 



2. I started with the passenger side. Remove the 2 - T20 Torx head screws. 


3. After removing the screws the old sun visor will be free. 


4. Line up the new sun visor with the existing factory holes. Reinstall the 2 – T20 Torx head screws 


5. Passenger side complete. 


6. Remove the 2 – T20 Torx head screws from the diver side. 


7. After removing the 2 screws the old sun visor will be free. 


8. Line up the new sun visor with the existing factory holes. Reinstall the 2 – T20 Torx head screws 


9. Install complete 


10. I chose to install the Omix-ADA Transfer Case Sun visor Decal (97-98 Wrangler TJ) Item J21494 MPN# 18676.77


11. Line up the decal with the edge of the sun visor. But slightly centered. 


Installation Instructions Written by ExtremeTerrain Customer T. Boyer 12/18/2017

Community Support