Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Rugged Ridge License Plate Bracket For 3 Inch Tube Bumpers on your 87-18 Jeep Wrangler YJ, TJ, JK & JL

Tools Required
  • Basic Hand Tools Required
Extreme Terrain
Shop Parts in this Guide

Note: No drilling required for installation. Omix-Ada in in no way responsible
for damage to the vehicle or personal injury that may occur during
installation of this product. Carefully read instructions before attempting
to install product.

Installation Instructions


Step (1) Locate (4) 1/4" x 1/2" bolts, (4) 1/4" flat washers, and (4) 1/4" nuts.
Attach license plate to license plate
holder by using the hardware listed


Step (2) Press license plate holder over the the front tube bumper as shown.Center license plate holder and secure it in place with (1) 1/4" x 1 1/2", (1) 1/4" flat washer, and (1) 1/4" nut.