Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$4,500 Giveaway! 3 Winners Enter Now

How to Install Rugged Ridge Black 4 Piece Front Euro Guards on your 1997-2006 Wrangler

Tools Required
  • Basic Hand Tools Required
Extreme Terrain
Shop Parts in this Guide

Step (1) Remove the front turn signal mounting screws. Place front guard over lamp and attach with longer supplied screws. Repeat for other side.

Step (2) To mount the side marker lamps place one guard over the lamp and mark the mounting hole location with a scribe or pen. Use a 3/16” drill bit and drill drill holes in the flare at the scribed spots. Use the supplied allen head bolts and nuts to secure the guard to the flare.

Note: Some Jeep models will require the use of the black spacers to clear bulges in the flare in relation to the side marker lamps. Not all of the spacers may be needed.