Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Rugged Ridge Tubular Front Bumper w/Hoop, Stainless Steel on your 1987-2006 Wrangler

Tools Required
  • Basic Hand Tools Required
Extreme Terrain
Shop Parts in this Guide

Step (1) Remove the front bumper from the vehicle. DO NOT DISCARD ORIGINAL HARDWARE. It will be reused for the new bumper installation.


Step (2) Position the new front bumper up to the frame and line up the holes to factory mounting locations. Using the stock bolts and supplied flat washers secure bumper to vehicle. Be sure to use all hardware supplied and tighten all bolts.