Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Bushwacker Cowl Vent Air Scoop Textured Black on your Wrangler

Installation Time

5 minutes

Tools Required
  • Tape

Installation Instructions:

1. Inspect the intake area for any large debris


2. Wipe down the air intake area with the included alcohol wipe


3. Place the vent scoop on the hood where you wish it to stay


4. Mark the corners of this area with tape


5. Peel back this amount of the tape


6. Place the scoop over the vent, making sure to match up the edges with the pieces of tape


7. Once in place, pull the tape out from in-between the body and cover


8. Push down, WITH TWO HANDS, on the vent. Also make sure to push on the edges so the tape adheres to the body  


9. Remove the tape used to align the vent scoop


10. Finished


Installation Instructions Written by ExtremeTerrain Customer Thomas Sandoval 05/08/2017