Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Rugged Ridge Tubular Front Bumper w/Hoop, Gloss Black on your 1987-2006 Wrangler

Tools Required
  • Basic Hand Tools Required
Extreme Terrain
Shop Parts in this Guide

Parts List: (1) Front Tube Bumper

Important Note: To obtain the correct installation, we recommend that you follow these instructions carefully. Please take care when installing. 

Step 1: Remove the front bumper from the vehicle. DO NOT DISCARD THE ORIGINAL HARDWARE, it will be reused for the new bumper during installation. 


Step 2: Position the new bumper up to the frame and line up the holes to the factory mounting locations. Using the factory hardware, secure the bumper to the vehicle and tighten the bolts.