Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Rugged Ridge Perforated Stainless Grille Insert in Satin on your Wrangler

Installation Time

30 minutes

Extreme Terrain
Shop Parts in this Guide

1. Open vehicle hood, remove grill rivets with a flat tool (e.g. screwdriver). Unplug marker lights. Pull grill off from spring clips attached at Pottom of grill. Save components removed.

NOTICE Aftermarket winch and/or Pumper may need to be removed.

2. Place grill insert and grill fasteners inside grill.

NOTICE Cutout in grill insert should be positioned to the lower side of grill on driver's side. (Circled in Red)



3. Press grill insert firmly against grill. Use grill fasteners as a guide to mark where to drill.


4. Use 3/16" drill bit to cut holes previously marked.

CAUTION Cutting/Sharp Edge Hazard: Cut carefully using gloves and eye protection.