(approx) 20 Minutes
Simple installation for anyone.
$9.99 (each)FREE Shipping on orders over $75
Features, Description, Reviews, Q&A, Specs & Installation
Performance Illuminated. If you want a tough auxiliary switch, the Rugged Ridge two position rocker switch with indicator light is the right answer for you. Featuring a marine grade construction with heavy duty, water resistant internal parts this switch's robust mechanism is perfect for auxiliary lighting and accessories. This switch's indicator illuminates a bright green when engaged for instant visibility night or day.
Compatibility. This switch is designed for use with up to 20 amps and is more than capable to handle your Wrangler's 12V system. It can easily be installed in combination with any Rugged Ridge electrical accessory or switch pod for a painless upgrade.
Application. This rocker switch is designed for all 1987-2020 Jeep Wrangler YJ, TJ, JK and JL models including Unlimited and Rubicon models.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 06, 2019
nice switch and all that. But switch does work but doesn't light up. which was the purpose of buying it. too much hassle to return for a $10 item. will probably just get another down the road. the other one I ordered works fine.Helpful (0)
August 25, 2019
This product was easy to install and fits perfectly in the original spots. I installed all 3 and they look perfect.Helpful (0)
June 15, 2019
I have different colors for different uses......... even found a usb charger that fits nicely with the switches in pillar pods on both sidesHelpful (1)
May 19, 2019
Light up Switch
This was an easy install works great . Fits perfectly in .Helpful (0)
February 16, 2019
Rocker switch install
A little more time consuming than I thought it would be. But works and looks good.Helpful (3)
February 15, 2019
This unit works fine, just wish there had been instructions showing which terminal was what..... So I will tell you which is which. On the end with two terminals, the one closest to the end is “Power In”. The one beside it is “Power Out”. The single pin on the other end is “Power In” to the switch LED.Helpful (6)
February 05, 2019
Would have given it five stars if it came with instructions that identified what each prong was. The prong nearest the front (light on the switch end) is power in. The prong next to it is power out. The prong at the other end is for the light on the switch.Helpful (6)
December 14, 2018
It looks good,fits perfect and it makes its own statement.Helpful (6)
September 08, 2018
it works OK
it fits that is about it thought it would of clipped into place other wise it works fine.I tell you what The Wife an I have two Jeeps A 2004 Jeep Wrangler X Which is mine an She has a 2006 Wrangler Sport both are soft tops which makes them a real Jeep LOL anyway Love the inline 6 back when made motors to last. Also both Jeeps are manual transmission.Helpful (6)
July 02, 2018
Shipping was fast, great quality product!! Easy to installHelpful (8)
I recently purchased and installed a 21" light bar using the Raxiom wiring harness. I don't like the switch that comes with this harness. Can this Rugged Ridge switch be used with the Raxiom harness as a replacement switch? Is it the proper type of switch for this harness?
The Rugged Ridge Two Position Rocker Switch can be used to replace the switch included with the Raxiom LED Lighting Switch Kit although minor modification to the wiring would be required to get the correct type of terminals to connect to the Rugged Ridge switch
Would you guys happen to have a wiring diagram for the switch? The terminals are unmarked and I can't seem to identify what is what? Thanks for your time.
The installation/wiring diagram for theRugged Ridge Two Position Rocker Switch w/ Indicator Light can be found here: https://lib.extremeterrain.com/guides/J103559-manu.pdf
I was looking for a switch that would fit the stock housing on a 1999 Jeep. Would this switch fit in the stock location?
Some trimming may be needed to allow for proper fitment of this switch.
will this fit 2018 jl
having trouble seeing my sway bar disconnect and locker switches on dash...do you have constant lighted replacement switches?
We do not have any constant lighted switches.
The Rugged Ridge Two Position Rocker Switch w/ Indicator Light is a standard size rocker switch, and would not fit in any factory locations for switches. A switch holder or switch pod would be required.
The Rugged Ridge Two Position Rocker Switch is a standard sized rocker switch, and can be used with any rocker switch holder designed for standard rocker switch sizes. We do offer some interlocking switch pods to allow expansion down the road, but we do not offer any individual pods. This can be found below. https://www.extremeterrain.com/rugged-ridge-rocker-switch-kit-172352.html
The Rugged Ridge Two Position Rocker Switch does not come with any wiring. Most people wire to the switch using female spade connectors.
Hello, this switch is meant to be used on Rugged Ridge Switch Panel and A Pillar Switch Pod.
I have a '98 Wrangler and this fit in the factory dash slot. Be aware it is a snug fit but is very sturdy and secure. Look at the available customer photo (my jeep) - no modifications were needed.
(approx) 20 Minutes
Simple installation for anyone.
What's in the Box