How to install Rugged Ridge Perforated Grille Insert in Black on your Wrangler

1. Open vehicle hood, remove grill rivets with a flat tool (e.g. screwdriver). Unplug marker lights. Pull grill off from spring clips
attached at bottom of grill. Save components removed.

Notice: Aftermarket winch and/or bumper may need to be
removed.

2. Place grill insert and grill fasteners inside grill.

Notice: Cutout in grill insert should be positioned to the lower side of grill on driver’s side. (Circled in Red)

3. Press grill insert firmly against grill. Use grill fasteners as a guide to mark where to drill.

4. Use 3/16” drill bit to cut holes previously marked.

Caution: Cutting/Sharp Edge Hazard:
Cut carefully using gloves and
eye protection.

5. Place grill insert and grill fasteners inside grill. With hardware provided, fasten the grill insert. Re-attach grill to vehicle and reconnect marker lights.