Maximize Your Set-Up.
Maximize the performance of your ’97 to ’06 Wrangler TJ with the Rough Country Dana 30 Front 4.10 Gears Ring and Pinion Kit. This ring and pinion kit is especially useful if you’ve upgraded to larger tires, as this kit can make your work towards its full potential. With this ring and pinion gear installed in your Jeep, more aggressive off-road maneuvers like rock crawling become much easier.
Regain Lost Power Through Re-Gearing.
As helpful as they are in an off-road scenario, larger tires can throw your factory gear ratio out of whack, resulting in a less than optimally performing driveshaft and engine. By installing the Rough Country Dana 30 Front Ring and Pinion Kit with its 4.10 gear ratio, your engine and driveshaft will start to perform like your larger tires are stock. This results in more efficient power and torque, as well as fuel economy.
The Rough Country Dana 30 Front 4.10 Gears Ring and Pinion Kit are forged from 8620 steel for extreme strength. This ring gear and pinion set is then heat treated, significantly raising the components’ durability. Additionally, this ring gear and pinion set is smooth-finished making it run cooler and quieter than other ring and pinion gear kits.
Installation By a Professional is Recommended.
Installing the Rough Country Dana 30 Front 4.10 Gears Ring and Pinion Kit requires the use of specialized tools, like a bearing press, as well as precision tools like a dial indicator. Expert-level mechanical knowledge is also needed, as well as a lot of time. Consequently, an installation by a professional is highly recommended.
Includes a 10-Year Limited Warranty Backing.
The Rough Country Dana 30 Front 4.10 Gears Ring and Pinion Kit include a 10-year limited warranty backing against manufacturing defects. Please visit the manufacturer’s website for more details.
The Rough Country Dana 30 Front 4.10 Gears Ring and Pinion Kit fit all 1997 to 2006 Jeep Wrangler TJ models.
The Rough Country Dana 30 Front 4.10 Gears Ring and Pinion Kit are for use with Dana 30 low pinion axles only. This ring and pinion gear kit won’t fit Dana 30 high pinion axles.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov