FREE 1 to 3-Day Delivery on Orders $119+ Details
Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Rigid Industries Dual D-Series A-Pillar Light Mount Kit (07-18 Wrangler JK)
Installation Time
15 minutes
Tools Required
- Box Cutter/Knife
- Torx 40 Bit
- 5mm Allen Wrench
1. Unscrew the front two A-Pillar factory bolts using a Torx 40 bit (Figure A). Then remove both bolts.
Figure A
2. Align one of the A-Pillar mounts with the two holes (Figure B).
Figure B
3. Replace the bolts removed in Step 3 with the supplied bolts using a 5mm Allen wrench (Figure C).
Figure C
4. Place an LED in the bottom mount spacer (Figure D).
Figure D
5. Tighten a bolt (not supplied) into both sides (Figure E).
Figure E
6. Place an LED in the top mount spacer (Figure F).
Figure F
7. Tighten a bolt (not supplied) into both sides (Figure G).
Figure G
8. Repeat Steps 2-9 on the other side of the vehicle.
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 06/13/2018
