FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Rigid Industries Ignite Backup Light Kit (87-18 Jeep Wrangler YJ, TJ, JK & JL) on your Jeep Wrangler
Installation Time
60 minutes
Tools Required
- Box Cutter/Knife (Packaging)
- Allen Wrench
- GoPro Mount
- Light Harness
1. Open the packaging and locate the bolt which cross-threads the mounting location (Figure A).
Figure A
2. Set the light onto the GoPro mount (not included) (Figure B).
Figure B
3. Place the bolt in the cross-threading location of the GoPro mount (Figure C).
Figure C
4. Using an Allen wrench, tighten the bolt into the mount (Figure D).
Figure D
5. Connect the red (positive) wire to the positive of a light harness (Figure E).
Figure E
6. Connect the black (ground) wire to the ground of a light harness (Figure F).
Figure F
7. Mount the light in the location desired (Figure G).
Figure G
8. Locate the light connector and light harness (Figure H).
Figure H
9. Connect the light to the wiring harness (Figure I).
Figure I
10. Repeat Steps 2-9 for the second light.
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/15/2018
