How to Install Rightline Gear Pop Up Tent on your Jeep Wrangler

Installation Instructions:

1. Set the tent contents out and undo the fabric strap holding the materials together (Figure A).

2. Connect the tent poles together (Figure B).

3. Work a tent pole into one side of the top of the tent (Figure C).

4. Once the pole is all the way through the top section, secure the end into the pocket (Figure D).

5. Place the tent pole end into the pocket on the other end, as well (Figure E).

6. Repeat Steps 4 and 5 on the other, perpendicular cross of the tent (Figure F).

7. With all four tent poles in their designated pockets, the tent should pop-up (Figure G).

8. Run the third supplied tent pole through the front (entryway) of the tent (Figure H).

9. Secure each end of the tent poles into their designated pockets (half-way along each side of the tent at the base (Figure I).

10. Secure the tent to the poles by pressing the clips along the poles (Figure J).

11. Secure the rainfly by buckling each strap in with the grey portion of the rain fly facing the entry way of the tent (Figure K).

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/08/2018