FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install RedRock 4x4 Spare Tire Off-Road Light Mount Bracket (07-18 Jeep Wrangler JK) on your Jeep Wrangler
Installation Time
60 minutes
Tools Required
- Box Cutter/Knife
- 19mm Wrench
- 7/8" Socket
- Socket Wrench
1. Carefully open the package using a box cutter or knife (Figure A) and ensure the hardware is included and undamaged.
Figure A
2. Using a 19mm wrench (or lug nut wrench), loosen the top two lug nuts of the spare tire (Figure B).
Figure B
3. Remove the top two lug nuts (Figure C).
Figure C
4. Place the two supplied lug nut extensions with the grip sides pointing in toward the spare tire (Figure D).
Figure D
5. Tighten each extension using a 19mm wrench (Figure E).
Figure E
6. Align the mount with the two extensions (mount can be facing up or down as long as light-mounts are facing away from the spare) (Figure F).
Figure F
7. Tighten each bolt (supplied) into the extensions using a 7/8" socket wrench (Figure G).
Figure G
8. Ensure the mount is secure (Figure H).
Figure H
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 05/30/2018
