Installation Time
(approx) 15 Minutes
Difficulty Level:
Simple installation for anyone.
FREE 2 or 3-Day Delivery on 10,000+ Items. Details
$16.99 (pair)
FREE Shipping on orders over $75Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Get a $30 Prepaid Visa Card!
Hey guys Adam here with extremeterrain.com and today we're taking a very quick look at and installing the RedRock 4 by 4 tail light covers with the Old Glory design available for the '18 and newer Wrangler JL. You should be checking these out, if you're looking to personalize the rear end of your JL by adding to the factory tail lights in a way that shows some country pride. Now these guys here are made from a stainless steel construction about a 16th of an inch thick, so they're pretty thin, but they go right on over the factory tail lights, add this little black bezel, matte black bezel with the American flag in the dead center punched out of the steel. This CNC cut steel has a black powder coated finish on top, so it helps with corrosion and rust resistance and it goes on using 3M automotive bonding tape on the backside.You can take that a little bit further, if you wanted to apply adhesion promoter of course, but using that 3M tape that's on the back there goes a long way as well. You just wanna make sure your tail lights are clean. Now these do come as a pair, they're gonna stick onto the center of the LED equipped models. If your factory Jeep came with factory halogen tail lights, these are not for you, you have a different shape tail light, but if you have LED tail lights like ours here, this is the perfect fit. Comes in right around 35 bucks, our install gets one out of three wrenches on our difficulty meter. Anybody can tackle this in the driveway at home with less than five minutes from start to finish, it is extremely simple, I'll walk you through it. Let's get started.All right, really the only step here after making sure that your tail light is clean, which ours is, is to just peel off the 3M backing here. I'm only gonna do the two strips because we're going back to stock, but you guys at home wanna peel off all six strips to make sure you get the best bond. If you wanna apply an adhesion promoter you can, do that now and then what you wanna do is line this guy up, I like to use the bottom as a reference, put pressure there, put firm pressure at the top end and each section of the 3M. Of course, the center section where the actual American flag is is not having 3M. Once you have that taken care of, repeat on the other side and you're good to go. That's gonna wrap up my review and install for the Red Rock 4 by 4 tail light covers with the Old Glory designed for the '18 and newer JLs with factory LED tail lights. Get yours right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment:
RedRock J133786-JL
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 15 Minutes
Difficulty Level:
Simple installation for anyone.
What's in the Box
10 More Questions