How to Install RedRock 4x4 Headlight & Turn Signal Cover Kit - Black on your Wrangler

Step 1\\

Using a panel removal tool, remove the (6) push clips holding the grille cover to the vehicle. Unplug the turn signals and pull the grille cover from the vehicle.

Step 2\\

Using a T-15 Torx bit, remove the (4) screws securing the headlight bezel to the vehicle. Remove the factory headlight bezel. Install the RedRock 4x4 headlight guard using the factory screws.

Step 3\\

Unclip the turn signals from the grille. Hook the bottom mounting tab onto the turn signal. Slightly bend the (2) upper mounting tabs out so that the guard ts over the turn signal. Then bend the tabs over the turn signal housing. Reinstall the turn signals on the grille. Reinstall the grille in reverse order.