How to Install RedRock 4x4 Angry Bird Grille - Matte Black on your Wrangler

Step 1\\

Remove the push clips holding the bumper trim panel.

Step 2\\

Wash the grille and surrounding areas with soap and water. Allow the grille and surround areas time to dry.

**Recommended: Wipe the cowl with isopropyl alcohol to ensure the cleanest surface possible.

Step 3\\

Remove the (3) screws securing the headlight trim to the vehicle.

Step 4\\

Test t the grille cover, then remove the tape backing and install the cover. Apply rm even pressure over the taped surfaced to ensure proper adhesion.

Step 5\\

Install the grille cover using the factory headlight trim screws. Use the provided nuts, bolts, and washers on the upper and lower mounting locations.