Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!

How to Install a RedRock 4x4 Wrap Around Tail Light Guard - Gloss Black on your 2007-2015 Jeep Wrang

Installation Time

15 minutes

Tools Required
  • #2 Phillips Screwdriver
Extreme Terrain
Shop Parts in this Guide

Before: 


Installation Instructions:

1. Unscrew stock screws from tail light assemblies. 


1. Attach tail light covers on tail lights with new screw, washer, and rubber grommet, only hand tight. Make sure rubber grommet is between tail light and tail light covers. 


2. Attach two screws (opposite ends of tail light) as checking for alignment on tail light assembly and body of Jeep 


3. Insert final two screws making sure to add washer and grommet before installation. 


4. Finally, tighten all screws as you check for clearance on body and light assembly. 


Installation Instructions Written by ExtremeTerrain Customer Rick Cater 06/05/2015