Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P

How to Install Raxiom LED Tail Light on your Wrangler

Tools Required
  • Phillips Head Screw Driver
Extreme Terrain
Shop Parts in this Guide

Step 1: Begin by removing the negative battery terminal. Then remove the (2) Phillips head screws from the factory tail light.

Step 2: Disconnect the tail light plug and then remove the light from the vehicle.

Step 3: Connect the Raxiom tail light harness to the factory plug. **Note: These are tight connections ensure they clip together.

Step 4: Install the Raxiom tail light with the factory screws. Reconnect the battery terminal and ensure the tail light functions properly.