FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Putco ABS Fender Flares - Chrome on your Wrangler

Installation Time

1.5 hours

Tools Required
  • Rivet Gun
  • 10mm socket and 3/8 drive ratchet
  • Utility knife
  • Flat screw driver
  • Body clip removal tools recommended
  • Needle Nose Pliers
  • Car Jack
  • Jack Stand
  • Tire Iron
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

Hardware Kit
Specialty body clips (14 pes for front fenders) (20 pes for rear fenders)
Christmas tree style plastic retaining clips (8 pes for fr ont fenders) (10 pes for rear fenders)
Plastic rivets (12 pieces for front fender) (12 pieces f or rear fender)


1) Location of specialty clips that hold the fender to the vehicle

2) Location of the reusable plastic push pin

3) The arrows point to the location of the four 10mm bolts


1) Location of arrows shows where pressure should be applied to flex the part into place

2) Location of arrows shows where the six rivets need to be removed from the fender

3) The arrows show where the ten specialty plastic clips attach to the vehicle

4) These two locations must be aligned first for fender to attach properly


Community Support

Word On The Trail

Great products, easy to spend your hard earned dollars. Have bought from here before and this is one of my favorite places to buy Jeep stuff.

aano
Previous Slide Next Slide