(approx) 10 Minutes
Simple installation for anyone.
$16.99 (each)FREE Shipping on orders over $75
Features, Description, Reviews, Q&A, Specs & Installation
Fender Ready. Pro Comm's CB antenna fender mount allows you to provide a secure way to mount your Jeep's CB antenna. The mount is made out of aluminum for extreme lightweight durability that won't compromise your finish with rust or corrosion.
Easy Mount. This Antenna Mount features Pro Comm's patented terminator connector for easy installation. This mount includes a 3/8" - 24 thread stud to fit most antennas on today's market.
Application. This Fender Mounts is designed for use on 2007-2018 Jeep Wrangler JK models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 16, 2019
Versatile, Unique, and Functional
This mount is very unique, as most people mount their CB antenna on their tire carrier. If you're like me, you upgraded your spare tire hinge and carrier and then your tailgate mount was incompatible... This is a quick and easy fix for this problem. The mount is secured right to the fender bolt with an existing bolt, and there are options to drill more holes to secure it into the fender (NOT REQUIRED) It grounds really well, as I thought the paint from my car would stop the ground current, it does not and works really well. I am using a medium-sized spring and my antenna (firestik 3') tends to swing a bit going over 40 miles an hour, and if you upgrade your spring size this shouldn't be a problem. If anything a little sway to your antenna makes it look badass!Helpful (1)
December 23, 2018
Works well, room to improve
The mount straight up does it’s job and does it well. I would buy it again and would recommend it. The ONLY problem I have is the mounting of metal on paint. If it had some sort of foam pad or backing that would be great. The antenna sways a bit and has slowly worked the bracket into my paint. In retrospect I should have found some sort or backing to put between them. I’d love to see a version with some rubber or foam built into the bracket or sold with it and double sided tape. Besides that, the bracket is amazing and I wouldn’t think twice about it. A bolt can be backed out and used to secure the mount, no drilling required. If you want it really secure a second screw would need to be drilled to secure it completely. I’m only using one bolt and it hasn’t budged but I have not hit trails yet with it.Helpful (7)
November 28, 2018
Goodies for my JK
All items purchases came in a timely manner and fit well.Thanks Extreme Terrain.Helpful (6)
August 08, 2018
Jeep antenna mount
I was looking for a good ground mount for my ham radio antenna in my Wrangler and this mount is working much better than the glass mount that I had, better reception and transmitting signal too.Helpful (7)
July 19, 2018
Pro Comm CB Antenna Fender Mount on a 2018 JL
The mount was not long enough to use an existing bolt like the picture shows in the add. That must have been a design change in the JL. I was able to mount it using four self-driving sheet metal screws. The mount is very stable and just what the doctor ordered.Helpful (7)
April 24, 2018
Just what I was looking for...
I mounted my CB antenna by my spare tire in back and didn't want to mount my Ham radio antenna near it (interference). This was the perfect mount for my needs. It installed incredibly easily and fit perfectly. It hasn't rattled lose, etc.Helpful (8)
March 31, 2018
Good fit, well made. Good price. When mounting make sure you mount the unit in a heavy metal area. so it does not move when finished. Light metal mounting allows unti to move when Jeep in in motion.Helpful (8)
March 21, 2018
Did the trick!
Fits right on the fender/hood seam. Cable was easily routed into the cab. Good easy solution if your not looking for a long cable run.Helpful (9)
February 24, 2018
Cb antenna install
Install was very fast and easy. It took longer to open the hood than to put on the bracket.Helpful (7)
December 28, 2017
2 meter antenna
This bracket worked perfectly to mount a 2 meter ham antenna on my 2008 wranglerHelpful (8)
Are you sure this fits the 2018 JL? I have one of these mounts and while it does fit my JK, it does not fit my JL. Do you have a way to make it work, or is there a different part number for the JL?
The Pro Comm CB Antenna Fender Mount will not fit JL models, we will have the site updated to reflect this.
Any assistance on how to loosen the bolt that secures the mount to the Jeep? All the bolt does is spin. I assume there is a nut on the underneath side, but not sure how to access that.
If the OEM bolt is spinning, the threads may be damaged, or the section it threads into may be damaged. Removing the inner fender may allow you to see underneath. If you are unable to access the underside a shop may be needed to extract the bolt.
Which antenna cable is needed for this mount?
Does this mount require you to scrape paint off of the fender on the inside of the hood in order to make a solid ground point? Or will the metal from the bracket get through my paint to the metal of my vehicle?
No, you do not need to scrape paint off the fender to install this mount, and if done correctly and carefully, you should not scrape any paint with this installation.
With this mount is there any body drilling that needs to be done?
There will be no drilling required for installation of the item. It uses a preexisting bolt location.
Yes, this can be mounted on either side of the hood. As far as mounting it closer to the front of the hood, you may need to drill into the fender area depending on how close to the front you want to get.
The Pro Comm CB Antenna Fender Mount will install using a different mounting point than the MORryde Side Mount Tray (https://www.extremeterrain.com/morryde-side-mount-jp54-018.html) so you should be able to use both together.
(approx) 10 Minutes
Simple installation for anyone.
What's in the Box