Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install a Rugged Ridge Brushed Billet Aluminum Automatic Transmission Dipstick Handle on your 1997-2017 Jeep Wrangler TJ & JK

Installation Time

5 minutes

Extreme Terrain
Shop Parts in this Guide

Contents:

Transmission Dipstick Handle (1) 


PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN.

Step 1. Use a small punch press the pin out that holds the dipstick in the factory handle. Do not discard the pin it will be reused. 


Step 2. Install the small sleeve over the end of the dipstick. Insert the dipstick and sleeve into the handle. Align the hole in the dipstick, sleeve and handle. 


Step 3. Align the hole in the dipstick, sleeve and handle. Insert the pin removed from the factory handle using a small punch to set the pin. 


Care and Maintenance:

Use soap and water to clean the aluminum surface. Regular cleaning will help maintain the appearance. Do not use harsh chemicals.