Dana 30 Front Axle/44 Rear Axle Ring and Pinion Gear Kit; 4.10 Gear Ratio (07-18 Jeep Wrangler JK, Excluding Rubicon)Find parts that fit my vehicle

4.10 Gears. If you are adding oversized tires to your Jeep JK, you'll want to upgrade your axle gears at the same time to maintain power and fuel economy. Optimize your performance and maintain your MPGs with the installation of Omix-ADA 4.10 30F/44R Ring and Pinion Gears for your 2007-2018 Non-Rubicon JK.

Quality Construction. Constructed from 8620 forgings to deliver a durable, thick cut application, the Omix-ADA Ring and Pinion Gears provide support for extra tough action. Backed by their 5-Year Warranty, you'll be receiving the ultimate in strength and quality.

Re-Gearing. When you increase the diameter of your tires, the engine has to work twice as hard to turn them. Naturally, that will lead to increased fuel consumption and reduced performance. Anytime you re-gear your rig, you can regain lost acceleration, performance and fuel economy.

Application. The Omix-ADA Dana 30F/44R 4.10 Gears are designed to work on 2007-2018 Jeep Wrangler JK, excluding Rubicon models. Please choose from the options above to order the Dana 30 - Front Reverse Gears only, the Rear Dana 44 Gears only or both the Dana 30 - Front Reverse and Rear Dana 44 Gears as a set.

Application Note. The Dana 30 4.10 Gears will require the use of a 3.73 and numerically higher carrier or an aftermarket locker. Upgraded carrier is required as factory carrier is not compatible.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov