- Front Cross Bar
- Rear Cross Bar
Free Shipping on Orders Over $75. Details
$149.99 (each)FREE Shipping
Depending on manufacturer's availability, this item may ship within 3-5 business days. You will be notified of any delays in manufacturing that surpass this timeframe.
Fitment: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Details
I read in a previous question and answer that the weight limit capacity on the roof rack is 13 lbs. Is that correct. If so, not enough for my paddle board.
Hello, The weight of the unit is about 13 lbs. You would be fine strapping up your paddle board.
What does it mean the top must be in the down position to attach the rack? Does that mean the top must be off?
The top will need to be removed or completely folded back for the rack to work as it mounts to the roll bars.
Would the Smittybilt overlander tent be able to fit on this rack?
This rack system has a 500lb weight limit, and will be able to hold up to the weight of the Overlander tent.
Will this Rack work on a TJ Sahara with full doors, or do they have to be removed? I know the surrounds have to be removed, but can a full door still close w Rack installed?
The Olympic 4x4 Quick n Easy Rack can be used with full or half door models.
Will these racks hold my kayak, each kayak weights about 40 lbs, will it carry one or 2 kayaks, I don't see a capacity
The Olympic 4x4 Quick n Easy Rack has a weight capacity of 500lbs.
Hello, this roof rack is not designed to use a basket, and the weight limit is 13lbs.
No, because of the mounting points on the Olympic 4x4 Quick n Easy Rack - Textured Black (97-06 Wrangler TJ) it requires your soft top to be completely down to install properly.
Installation Time: Afternoon
July 12, 2018
Watch what hardware you're shipped
This rack is great. It simply attaches to your rollbar; but that has some implications - especially if you're sent mounting hardware for a JK. (BTW, QT has this for sale as well but with a long backorder...maybe waiting on correct hardware to be available from Olympic?) Anyways, installation on my 2006 LJ required me to trim the padding of the roll cage cover at the front and back. The correct hardware utilizes the front door surround bolt hole - and just one hole per side. The JK hardware simply clamps around the roll cage. For the JK hardware to work on my LJ, I had to purchase appropriate-length bolts for the front...as the included clamp size is a bit too large for the front of the TJ roll cage. I also lined the bottom of the front clamps with some felt weatherstripping to "fill the gap". A bit of a mod, but very doable. Caution to anybody looking to get TJ/LJ mounting hardware first try.
Bang for your Buck 3
Installation Time: Less than 1 Hour
February 25, 2018
Recently bought this product and absolutely love it. It helps when loading the kayaks on the Jeep
Bang for your Buck 5