(approx) 30 Minutes
Simple installation for anyone.
$44.99 (kit)FREE Shipping on orders over $75
Features, Description, Reviews, Q&A, Specs & Installation
Construction. The Off Road Only LED License Plate Light has a completely-sealed construction, which makes it water and vibration proof. Its polycarbonate housing extends over the license plate by nearly two inches. This LiteDOT plate light comes with a 6-foot harness that can be easily disconnected while removing the spare tire.
Function. This plate has three white LEDs that illuminate your jeep's license plate and three red LEDs, which can be used as a brake light.
Installation. This Jeep Wrangler accessory can be installed on a license plate that has 7-inch mounting holes at the center.
Compatibility. This license plate light is designed to fit 1987-2020 Jeep Wrangler YJ, TJ, JK and JL models. It can also be installed on trailers, motor homes and other off-road vehicles.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 21, 2019
LED license plate light
Overall this is a good product and I'm happy with the mod. However, it is not very clear in the description that you need to purchase additional mounting items in order for this to work. When I got it in the mail I realized I needed a license plate mount for my spare tire for this to work. My biggest complaint is the directions included stink. We ended up following the extreme terrain video and that got us through for the most part. What isn't mentioned is this requires a good amount of wiring and wire running, you'll need to remove interior rear panels to access things and run your wires. This is NOT a 30 minute install unless you're crazy handy and know where you're going inside the Jeep. Once installed, I like the look, the lights are small but bright, the description and directions just need some updating.Helpful (1)
July 11, 2019
Led License plate Light
This slim line set up is great. Both the white/red leds are bright. The only complaint is the instructions are wrong. They instruct to connect to the tailgate bundle and the red wire to the white/brown wire. For my jeep '15 it is a white/yellow wire. Once I figured that out it works great!Helpful (2)
June 30, 2019
Super easy install. The online install video was super easy to follow and gave some great tips on how to install the wires. I've been doing vehicle wiring for many years and learned a new trick from this video.Helpful (1)
May 15, 2019
This light was easy to install. I did have to modify the holes to make it fit with the bracket but no big deal if you're handy with things like that. the light itself is very bright and the instructions where straight forward. The only problem I had was when wiring the light in I couldn't find the white and brown wire for the third brake light feature. I thought I had the right wire but it doesn't work. I just needed the tag light honestly and I'am happy with just having that.Helpful (1)
April 20, 2019
Great quality and super bright light! Worked as expected and had just enough wire to run down my tire carrier.Helpful (1)
February 23, 2019
Took a short time to install. Looks fantastic, bright, lightweight, and an excellent addition to keep you legal while moving your plate.Helpful (2)
December 21, 2018
It does what it’s supposed to do and with no issues this farHelpful (3)
December 11, 2018
this is a very well made product looks great worth the moneyHelpful (3)
October 21, 2018
Extreme Terrain employee told me it was used for jerry gas can mounting bracket in a photo at the bottom of the page for the Jerry can. That this is what was used for putting it on the spare tire.Helpful (3)
July 29, 2018
The products is really awesome, having the quick disconnect, I set mine up without the tire carrier and I made it look factory, it came with some wire crimps which I only had to use one, I give it 5 stars but I was a little worried about the difference in wire gauge causing an issue but so far so good boyh lights are very bright at night.Helpful (4)
Does this license plate relocation kit come with the bracket that attaches behind the spare tire? I have an aftermarket swing away tire carrier.
No, the LED License Plate Light w/ 6 ft. Harness will not include the bracket.
Can I splice into the existing license plate light wires and relocate from there with this harness?
This will come with 6' of wiring to connect to the factory wiring.
I would like to mount this to my spare tire as shown in the pictures but noticed the product doesn't come with a mounting bracket. Where could I find this bracket?
The LED License Plate Light uses its included bracket to attach to your license plate mount, behind the license plate. We do offer a complete Spare tire license plate mount with the light, linked below: https://www.extremeterrain.com/zone-offroad-spare-tire-license-plate-mount-kit-w-light-8717-yj-tj-jk.html
I have it connected and when I turn on the Jeep lights the white Leds light up as they should. However, when I depress the brakes the red Leds won't come on? Suggestions?
We do apologize you are having this issue with yourLED License Plate Light w/ 6 ft. Harness. Please contact our customer service department so that we may directly assist you with this issue. Our contact information can be found here: https://www.extremeterrain.com/contact.html.
I have an aftermarket rear view camera mounted at the 12 o'clock position of the spare tire. Will this interfere with the camera?
This may interfere with the rear view camera, however without being able to see the line of site on your camera we would be unable to determine this.
This will come as displayed in the video
Noadditional bracket would be needed with this part to install on your Barricade swing away tire carrier. This would be a direct bolt part.
Yes, the LED License Plate Light w/ 6 ft. Harness can be used with the stock tire mount.
We would suggest confirming with your local inspection and emissions station to confirm if the LED License Plate Light will be legal in your area!
(approx) 30 Minutes
Simple installation for anyone.