Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Off Camber Fabrications by MBRP Formed Windshield Single Light Kit - 50 in. Light on


PLEASE READ BEFORE STARTING INSTALLATION

While PIABRIP Inc. has made every effort to ensure that all components of this kit we of superior qvulity and properly packaged, it is the installer's responsibility to ensure the following before starling:

• that ALL components shown above ore present
• that ALL mating components 51 together.
that there are no &imaged components.
• that the kit you have purchased is appropriate for your yeor and model of vehicle_
that the kit will not interfere with any rnoditIcations previously installed or planned.
• that you hove read and understand these instnxtions.

1. Remove all six driver side windshield bracket bolts using a T40 torx bit. Refer to Figure 1.


2. Prewire your light bar by running the harness behind the windshield bracket and under the cowl into the engine compartment.
Refer to Figure 2.


3. Reinstall the driver side windshield bracket and loosely
install the lower two bolts.
Refer to Figure 3.


4. Remove the two forward facing, and the top two outer bolts from the passenger side windshield bracket.

5. Install the Gasket into the Driver Upright along with the two outer bolts. Mount the assembly on the vehicle and thread in the outer bolts, followed by the two front bolts Do not tighten yet.  Refer to Figures 4 and 5. 



6. Repeat step 5 for the Passenger Upright. Ensure Gaskets are centered underneath the uprights and tighten all bolts.

7. Loosely install both Driver and Passenger Light Brackets with the supplied hardware. With the help of a friend, install the light bar and secure it to the light brackets.  Refer to Figure 6. 


8. Tighten the Light Bar hardware first to help properly position the light brackets on the uprights. Once the position is set, tighten the light bar bracket hardware. Refer to Figure 7. 


9. Finish wiring your light bar.


Congratulations! You’re finished! We are sure that you will enjoy this Off Camber Fabrications product by MBRP Inc.