Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler Enter Daily

Off Camber Fabrications by MBRP Full Width Front Winch Bumper w/ Formed Light Bar (07-18 Jeep Wrangler JK)

ExtremeTerrain no longer carries the Off Camber Fabrications by MBRP Full Width Front Winch Bumper w/ Formed Light Bar (07-18 Jeep Wrangler JK). Please check out 2007-2018 JK Jeep Wrangler Front Bumpers for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features, Video & Details

  • CNC Laser Cut from Steel Plating
  • Easily Add Your Own Lighting with the Light Bar Hoop
  • Supports a Range of Winches
  • Durable Black Powder Coat
  • Includes Installation Hardware
  • Works with OEM Fog Lights
  • Weight: 108 lbs
  • Fits 2007-2018 Jeep Wrangler JK

Review & Installation Video

Review & Install Video

I'm Ryan from, and this is my review of the Off Camber Fabrications by MBRP Stubby Front Bumper, fitting all 2007 to 2016 JKs. This bumper is available in a couple of different configurations. It's available with this bumper hoop that you see here that has two light mount tabs on it, and it's also available with a formed LED light bar mount that's designed to accept most 20-inch standard LED light bars. That light bar mount will give the bumper a little bit more of a unique look, in my opinion, than this hoop does. Today, we're gonna talk a little bit about the construction, some of the features and of course the installation of this bumper. This bumper is for those of you who fall in love with the looks and the function of this bumper and are interested in some of the unique offerings that Off Camber Fabrication. The formed LED light bar mount that is available on this bumper will give a bumper a pretty unique look and the fact that these bumpers are available LINE-X right from Off Camber Fabrication, so you can take it out of the box, bolt it onto your jeep, instead of needing to LINE-X or put some other bed liner on it yourself, are two things that make these bumpers a little bit unique and will command a higher price. In my opinion, if you're looking to get this bumper powder-coated with this tubular bumper hoop with light mount tabs on it, there are some other options out there that are going to give you the same look and the same function for a little bit less money. Now, the first thing you'll notice about this bumper, and it says it right there in the name, is that it is a stubby bumper. A lot of you guys are just after that stubby look. If you have some flat fenders and the whole rest of the front of the jeep sort of comes to a point, having a full-width bumper just doesn't really go with the rest of the lines of the vehicle, so in that case, a stubby definitely makes sense, orr if you're running big tires, 37s, for instance, and you need to have that clearance, so that when you're flexing off-road, the tire doesn't contact your bumper, again, a stubby is a great way to go. This bumper, in particular, is made from three-sixteenth inch steel, and the D-ring mounts, which also double as bumper mounts, are a quarter-inch thick, so this thing is going to be very strong. As I mentioned before, it's available in the two different configurations with either the bumper hoop with light mount tabs or a formed LED light bar mount, and it also has this built-in winch plate. This plate is a little bit unique because it is drilled in a few different locations to ensure that it'll accept any 9,500-pound winch or any 12,000-pound winch that you wanna put in it. Now, because this is a bit of a sunken winch plate, you are going to have a little bit of trouble with some of those big-body, 12,000-pound winches, and Off Camber Fabrication does caution you that some of those will not fit properly. Now, as you would expect with a lot of stubby bumpers, you will have to relocate your vacuum pump if you have a 2012 to 2016 JK. We do offer a couple of kits to be able to do that, and while it is one extra step in the installation, it's not especially difficult to do. This bumper will also accept your factory fog lights where right in the front, which is always a nice feature, in my opinion. Even if you plan on running a lot of auxiliary and aftermarket lights, being able to use those factory fog lights is always a good thing. The jeep's wired for it, you already have the lights. Why not have a spot to put them? Then some of the stubby bumpers on the market don't have those, so it's a nice feature to see. Finally, up front here, you have a spot for a hi-lift jack. Hi-lift jacks can be a little bit difficult or dangerous to use, and having a spot for the tongue of the jack to sit into the bumper does make things a little bit more secure. As I mentioned before, these bumpers are available in a couple of different finishes. You can get them with the black powder coat finish, or you can get them LINE-X right out of the factory. This LINE-X coating is gonna hold up to anything you can throw at it, and while it is a little bit more expensive, it's one of the things that makes this bumper a little bit more unique and, in my opinion, a little bit more worth the cost. The design of this bumper makes it mount onto the jeep very easily. The first step is, of course, to remove your factory front bumper, and you'll do that by removing at first the splash shield and then the eight nuts that hold it into place. Finally, you'll have to pop the plastic clips that hold the fog light wiring harness onto your bumper and then remove the bumper. From there, you can remove your factory fog lights out of the front bumper and install them into your new stubby bumper. If you're going to be installing a winch onto your new bumper, you'll wanna install that now as well. It does make the whole package a little bit heavier when hoisting it onto the jeep, but it's near impossible to get to these winch mounting bolts once the bumper's on the jeep, so you will wanna put it together as one package before installing it onto the jeep. You'll also wanna install whatever light mount bar you have ahead of time. After everything is assembled on the ground, you can hoist the whole bumper onto the frame rails, and then you'll bolt through your D-ring mounts through the bumper and into the frame rails, giving it a really solid connection. This whole installation will probably take you around an hour, and you won't need any specialty tools to get this done, just some traditional hand tools. Although the nuts on the factory bumper can be a little bit difficult to get to, so you will wanna have an extension and some universals handy. Now, as I mentioned, this bumper is going to be a lot more expensive than a lot of other stubby bumpers on the market. However, this is available in a couple of different unique configurations. The formed LED light bar mount that accepts most 20-inch light bars does give this bumper a unique look that you're not going to find from a lot of other manufacturers. Also, the fact that this is available with the LINE-X finish also makes it a little bit unique. In my opinion, if you're going to be taking advantage of some of those additional features that are only available through Off Camber Fabrication, then this is going to be worth the price tag attached to it. However, if you're just looking to get a powder-coated bumper and you're just looking to get the standard bumper hoop with light mount tabs, in my opinion, there are some bumpers on the market that will look and function similarly and save you some money. Rugged Ridge, for instance, offers a modular bumper that will get you very close to this look and function for a little bit less money. If you're specifically looking for a stubby bumper with a formed LED light bar mount and a LINE-X bed liner finish right out of the box, Off Camber Fabrications is one of the only places to go. This is a very well-built bumper, and I have nothing bad to say about it. However, if you don't quite have the budget for this bumper, there are some others on the market that will give you a similar look and similar function for a little bit less. That's my review of the Off Camber Fabrications by MBRP Stubby Front Bumper, fitting all 2007 to 2016 JKs, that you can find right here at

Tenacious Design. Equip the front end of your Wrangler JK with a tough-as-nails new bumper. The Front Full Width Winch Bumper Package from Off Camber Fabrications is laser cut from a single piece of heavy duty steel plating and mounted with 0.25-inch thick mounting brackets for a sturdy fit that will lead your JK into duty, whether it's hardcore rock crawling, extreme off roading or just driving around town. Even better, its unique design allows for OEM fog lights and additional lighting, so you'll never be left in the dark.

Versatility. This bumper is built to work with a wide range of 9.5 and 12K winches, including ones from manufacturers like Milemarker, Ramsey, Warn, Superwinch and T-Max. Add your own lighting with the light bar hoop and accommodate OEM fog lights as well.

Installation. Off Camber Fabrications includes the hardware you'll need to install. All you'll need is a few fairly common tools and a couple of hours.

Warranty. Off Camber Fabrications gives you a 3-year warranty on the bumper components and a 1-year warranty on the coating.

Application. This Off Camber Fabrications by MBRP Front Full Width Winch Bumper w/ Formed Light Bar is built to fit any JK Wrangler built between 2007-2018, including JK, JK Unlimited and JK Rubicon.

Special Note. JK Models built between 2012-2018 will require a vacuum pump relocation kit (part # 132032).

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

MPN# 182938

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Front Full Width Winch Bumper with Formed Light Bar
  • (1) Installation Hardware
Installation Info
Tech Specs

You Might Also Like

Customer Photos

More Products You Might Like

Q & A

No questions about this product yet.

Ask the First Question

Recommended For You

Customer Reviews (1) Write a Review

Overall Rating 5

out of 5 stars

Installation Time:Afternoon

  • Fit 5 5
  • Appearance 5 5
  • Bang For Your Buck 5 5

  • 5/5

    Installation Time: Afternoon

    April 06, 2017


    This bumper makes my jeep look 100x better! And it was an easy install!


    Year: 2013Submodel: Wrangler

    Helpful (8)

Related Wrangler Categories