Motive Gear Dana 35 Rear Axle Ring and Pinion Gear Kit; 4.88 Gear Ratio

Turn Your Transmission In your Favor. The Motive Dana 35 Rear Ring Gear and Pinion Kit - 4.88 Gears allow you to sub out your stock final drive for a high quality custom upgrade that allows you to tailor your power use for your day-to-day. This leads to overall increases in fuel efficiency as you convert your engines rpm into useful mechanical energy.

Playing the Numbers Game. The Motive Dana 35 Rear Ring Gear and Pinion Kit - 4.88 Gears are ideally tailored to those running an increased wheel diameter that would otherwise affect final drive efficiency. The larger turning radius is compensated for by the augmented gear ratio, so you can rock crawl with confidence while keeping your fuel economy in check.

Exceptional Component Quality. The Motive Dana 35 Rear Ring Gear and Pinion Kit uses high-toughness material in order to maintain a long lasting, high-tolerance mesh to avoid rattling and loss of efficiency. The 7.5 in. ring gear and 26-spline pinions 8620 Steel construction has been designed to last, so you can count on it rev after rev.

Installation. The Motive Dana 35 Rear Ring Gear and Pinion Kit - 4.88 Gears requires mechanical expertise and tracking should be completed post-install.

Warranty. The Motive Dana 35 Rear Ring Gear and Pinion Kit - 4.88 Gears includes a limited 1 Year/50,000 mile warranty.

Application. The Motive Dana 35 Rear Ring Gear and Pinion Kit - 4.88 Gears fits all 1987-06 Jeep Wrangler YJs and TJs. 2001-2006 Model Years requires a 3/8 in. Ring Gear Bolt Carrier.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov