How to Install a MBRP Hi Lift Jack Mount Kit, Black Coated on your 07-18 Jeep Wrangler JK; 2018 Jeep Wrangler JL

This kit requires the installation of Off Camber Fabrications Roof Rack Kit # 130717 or # 130927 prior to installation of this Hi Lift Jack Mount Kit # 130872. If you have installed or are installing the Cargo Basket Kit # 130822, please refer to step 5.

1. Mount the Hi Lift Jack Mounting Bracket Assemblies onto the Rear Crossmember of your Roof Rack and secure with the supplied 3/8” Bolts, 3/8” Flat Washers, and 3/8” Nyloc Nuts. Be sure the studs face the rear of the Jeep. Refer to Figure 1. 

2. Slide the Rubber Sleeves over the studs on the Hi Lift Jack Mounting Bracket Assemblies. Refer to Figure 2. 

3. Install your Hi Lift Jack onto the Jeep by sliding the studs on the Hi Lift Jack Mounting Bracket Assemblies through the holes on the beam of the Hi Lift Jack. Check for clearance between the hardtop and the Lifting Pad of the Hi Lift Jack. It may be necessary to mount the Hi Lift Jack with the Lifting Pad facing up. Refer to Figure 3. 

4. Install the Retainers over the studs on the Hi Lift Jack Mounting Bracket Assemblies followed by the supplied Hand Knobs and tighten. Refer to Figure 4. 

5. Installation of this kit with the Cargo Basket Kit # 130822 requires installation as shown. Refer to Figure 5. 

Congratulations! You are finished. We are sure that you will enjoy this Off Camber Fabrications Off Camber Fabrications product by MBRP Inc.